Readme for SPB Release version 17.4 Copyright (c) 2020 Cadence Design Systems, Inc. All rights reserved worldwide. Fixed CCRs: SPB 17.4 HF014 01-29-2021 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2364495 ADW COMPONENT_BRO DE-HDL Part Manager - Part Table Filter window issue in release 17.4-2019: Window is shifted up and is not fully visible 2361104 ADW DBEDITOR Schematic model losing association to the part number in Database Editor 2324712 ALLEGRO_EDITOR 3D_CANVAS Incorrect component placement after bending in 3D Canvas 2331953 ALLEGRO_EDITOR 3D_CANVAS Finished hole size conflict: Difference in measurement of diameter in 3D Canvas 2351250 ALLEGRO_EDITOR 3D_CANVAS 3D Canvas Collision Detection segmentation fault 2427277 ALLEGRO_EDITOR 3D_CANVAS Conflict in finished hole size in 3D Canvas and 2D. 2428041 ALLEGRO_EDITOR 3D_CANVAS Hole plating is displayed incorrectly for 3D Canvas 2342729 ALLEGRO_EDITOR CROSS_SECTION Total thickness and other values in the 'Info' section of Cross-section Editor do not change in Multi Stackup Mode 2346225 ALLEGRO_EDITOR CROSS_SECTION Release 17.4-2019: Cross-section not showing correct thicknesses of different zones 2366440 ALLEGRO_EDITOR CROSS_SECTION Info tab of Cross-section Editor not showing thickness of the selected stackup 1984203 ALLEGRO_EDITOR DATABASE Drill holes not displayed correctly in the Zone area 2338909 ALLEGRO_EDITOR DFM Pin to Line Same Net Spacing, DFF spacing not Flagged DRC 2353416 ALLEGRO_EDITOR DFM Cannot add comment when waiving a DRC in release 17.4-2019, but was allowed in release 17.2-2016 2416910 ALLEGRO_EDITOR DFM DFF bug about cutout to shape spacing: DRC not shown if part of shape inside cutout 2408246 ALLEGRO_EDITOR GRAPHICS GPU acceleration: Radius corners on padstacks are inverted on move 2421922 ALLEGRO_EDITOR INTERFACES PDF Export does not honor colors on hatched shapes 2364660 ALLEGRO_EDITOR MCAD_COLLAB Importing IDX in Allegro PCB Editor does not import the correct drill size and plating type. 2330770 ALLEGRO_EDITOR PLACEMENT Allegro PCB component placed outside of drawing extents; symbol does not fit into the drawing 2415259 ALLEGRO_EDITOR REPORTS Allegro PCB Editor stops responding on running DRC Report from Status dialog DRC button when DRC count is very high 2348624 ALLEGRO_EDITOR SCHEM_FTB Design Sync removing Mounting Holes 2210611 ALLEGRO_EDITOR SHAPE Void in Shape for Unused Embedded Component Pins 2332910 ALLEGRO_EDITOR SHAPE Unintended voids on Layers for indirect attach via 2342975 ALLEGRO_EDITOR SHAPE PolyBool is running out of memory with arc during poly-operation called from SKILL 2359333 ALLEGRO_EDITOR SHAPE Pads missing thermals in release 17.2-2016 2422586 ALLEGRO_EDITOR SHAPE Shape partially disabled when using QIR2, shape fast mode 2360393 ALLEGRO_EDITOR THIEVING Information missing for error code SPMHMF-199: No thieving shape is left after voiding. 2344693 ALLEGRO_EDITOR UI_GENERAL Command window loses focus for keyboard commands or aliases 2345533 ALLEGRO_EDITOR UI_GENERAL 'show element' stops responding if run on many objects 2351789 ALLEGRO_EDITOR UI_GENERAL Fail to open Allegro Package Designer Plus, Allegro PCB Editor, and any other applications in Linux SUSE12 2364030 ALLEGRO_EDITOR UI_GENERAL Setting variable and using a template board still opens the new design form. 2369265 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor crashes on running 'prepopup' command 2399078 ALLEGRO_EDITOR UI_GENERAL Floating 'Visibility', 'Find', and 'Options' panes are visible when running Allegro PCB Editor with '-nograph' 2399253 ALLEGRO_EDITOR UI_GENERAL axlFormGridSetSelectRows() is not selecting rows in release 17.4-2019, but works in release 17.2-2016. 2289044 ALLEGRO_LIB_CRT CORE Scrolling changes list properties in Properties Terminal window 2291932 ALLEGRO_LIB_CRT CORE LC does not load changed footprints 2311602 ALLEGRO_LIB_CRT CORE Unable to change some Advanced Settings: Can be changed using XML but not from GUI 2322838 ALLEGRO_LIB_CRT CORE LC - View Footprint shows incorrect paste mask 2352074 ALLEGRO_LIB_CRT CORE Need to log in twice into LC repository: Authorization error on first try 2354152 ALLEGRO_LIB_CRT CORE Release 17.4-2019, LC crashes when editing padstack 2354159 ALLEGRO_LIB_CRT CORE Release 17.4-2019, LC creates wrong contact area 2415073 APD DIE_GENERATOR Problem importing die text file: Allegro Package Designer Plus stops responding 2428118 APD DIE_STACK_EDI Allegro Package Designer Plus closes on attempting to open die stack editor 2354812 APD VIA_STRUCTURE Loading via structure after removing all instances results in error (SPMHII-507) related to symbol definition 2412221 APD WIREBOND When moving Tack Points using Auto Spread the tool will lock up 2374740 CAPTURE NETLISTS Capture is crashing during create netlist with design 2328262 CAPTURE OTHER Localize Part Manager menu for Japanese 2330271 CAPTURE OTHER Release 17.4-2019: Capture crashes when design opened from server 2332901 CAPTURE OTHER Save Project As command creates multiple folders if folder name has acute accent mark (á) 2307691 CIS PART_MANAGER Capture CIS stops responding on linking database part from Part Manager 2340055 CIS PART_MANAGER Capture and CIS Explorer stop responding if Part Manager is not opened before CIS Explorer 2354106 CONCEPT_HDL COPY_PROJECT Release 17.4-2019: Copy Project does not preserve module_order.dat 2309487 CONCEPT_HDL CORE Running script with 'no_graphic' does not minimize GUI 2340900 CONCEPT_HDL CORE Release 17.4-2019: Choosing 'Help->About' crashes Design Entry HDL 2347561 CONCEPT_HDL CORE DE-HDL Windows mode selection allows unintentional moving of objects 2350410 CONCEPT_HDL CORE DE-HDL 'Rename Signal' behaving inconsistently: Net needs to be selected and cursor placed before choosing option 2357604 CONCEPT_HDL GLOBALCHANGE Global modify GUI fields are cropped 2312845 CONSTRAINT_MGR ANALYSIS Release 17.4 Allegro Physical Viewer Plus: 'Analyze' option missing from pop-up menu 2363853 CONSTRAINT_MGR CONCEPT_HDL Release 17.4-2019 DE-HDL CM Class to Class Spacing Constraint name incorrect when Class name GND used 2327886 CONSTRAINT_MGR OTHER Licensing issue with OrCAD PCB Designer Standard and Static Phase at Vias option 2346012 CONSTRAINT_MGR TECHFILE Interlayer Spacing checks is not active after importing techfile 2288948 CONSTRAINT_MGR UI_FORMS Change Save icon to a floppy disc to match other schematic editors 2341693 CONSTRAINT_MGR UI_FORMS Release 17.4-2019, Constraint Manager: Need ability to change icons 2341421 F2B DESIGNVARI Variant management of custom variables upon variants copy: Defaults to base value 2360447 GRE IFP_INTERACTI Cannot blank bundled rats after doing 'Display - Show Rats - Net' 2335847 PCB_LIBRARIAN SYMBOL_EDITOR Error notification when launching Symbol Editor with locked grid settings 2356726 PCB_LIBRARIAN SYMBOL_EDITOR Symbol_Units LOCK directive pop-up messages when cell opened in PDV 2317881 PCB_LIBRARIAN SYMBOL_EDITOR Cannot change grid visibility using 'eye' icon in new Symbol Editor 2320117 PSPICE MODELEDITOR Menu of Model Editor cannot be localized. 2270037 PSPICE MODELING_APPS Cannot edit PSpice center tap transformer component after placing it 2294168 PSPICE SIMULATOR Strange result if PWL sources are used 2312121 PSPICE SIMULATOR ETable function does not support values defined as parameters 2313080 PSPICE SIMULATOR Cannot define parameters for ETable 2333346 PSPICE TI_CONTRACT Constrained Manager related dictionary not found error on running PSpice for TI 2364119 PULSE ADHOC Error VOS-31 should clear itself when resolved 2421385 PULSE ADHOC Copied project maintains the version history of the source and is not seeing commits to this project 2364115 PULSE CORE LiveBOM and PDF data not getting generated in master/data setup 2400092 PULSE R2PLM-WC PFM stops responding during publishing when WC EPM doc numbers are auto-created with spaces 2416512 SIP_LAYOUT STREAM_IF Some arcs go to the wrong direction in GDS in release 17.4-2019 2417082 SIP_LAYOUT STREAM_IF Some arcs go to the wrong direction in GDS in release 17.2-2016, HotFix 072 2401836 SPIF OTHER Allegro PCB Editor crashes on exporting to Allegro PCB Router or running 'auto_route' 2409784 SYSTEM_CAPTURE CONTEXT_MENUS Tcl scripting - Adding context menu to a component not working 2363049 SYSTEM_CAPTURE HIERARCHY Allegro System Capture shows two times the number of blocks in schematic in the design hierarchy 2411591 SYSTEM_CAPTURE IMPORT_DEHDL_ DE-HDL to ASC conversion and exporting netlist to board 100% connected creates opens 2361129 SYSTEM_CAPTURE NETGROUP Allegro System Capture copy and paste signals from netgroups result in renamed signals after pasting when they exist 2274198 SYSTEM_CAPTURE PACKAGER The Assign Pin Number pop-up menu option either does not work or is grayed out 2334299 SYSTEM_CAPTURE SELECTION Selection behaves unexpectedly if a group selection is made followed by selecting a single wire with a net name 2363137 SYSTEM_CAPTURE SYMBOL_GRAPHI Graphics in Symbol Editor do not match what is shown in System Capture. 2321518 SYSTEM_CAPTURE VARIANT_MANAG Defining variants in System Capture: Variant information lost on copy-paste 2412827 SYSTEM_CAPTURE WIRING Crash when connecting to pin 25 of part 0001-0284.955 2301885 TOPXP SSIVIEWER Display results of interest rather than showing all the waveforms in SSIviewer after SSI-PBA simulation Fixed CCRs: SPB 17.4 HF013 12-10-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2317991 ADW DBEDITOR Two symbols named Conn1x28_AB and EPC2 disappear from the DB editor. 2337802 ADW DBEDITOR Saving Schematic Model Classification created several copies of the classifications and removed the original 2344239 ADW DBEDITOR Symbol mt41k128m8da disappeared after checking in to EDM 2331095 ADW LIBDISTRIBUTI Schematic symbol missing after undo-checkout in EDM 2347550 ADW PART_MANAGER Part Manager does not see VALUE property changes 2056547 ALLEGRO_EDITOR 3D_CANVAS 3D model not shown for component with STEP file assigned 2247481 ALLEGRO_EDITOR 3D_CANVAS Error message for bend operations being disabled in release 17.2 for rigid-flex: Cannot offset planar face to valid body 2299554 ALLEGRO_EDITOR 3D_CANVAS Error message on starting 3D Canvas and after bending all objects regarding object outside design 2303282 ALLEGRO_EDITOR 3D_CANVAS Unable to bend design 2345138 ALLEGRO_EDITOR 3D_CANVAS Bend operations are disabled: Cannot make wires with duplicate vertices 2346811 ALLEGRO_EDITOR 3D_CANVAS 3D Canvas bender engine error due to duplicate vertices 2067211 ALLEGRO_EDITOR CROSS_SECTION The Cross-section Chart view in the Cross-section Editor does not remember its settings. 2228181 ALLEGRO_EDITOR CROSS_SECTION Allegro PCB Editor cross-section, release 17.4-2019: Pressing 'Enter' does not move to next field 2210674 ALLEGRO_EDITOR DATABASE BGA component is split on moving between zones 2260964 ALLEGRO_EDITOR DATABASE Backdrill via replacing fails in release 17.2-2016, HotFix 062 and HotFix 066 but ok in HotFix 050 and Hotfix 065 2291817 ALLEGRO_EDITOR DATABASE Corrupt .brd file causes Allegro PCB Editor to quit on running database check 2317130 ALLEGRO_EDITOR DATABASE Message to upgrade appears on opening DRA files created in release 17.2-2016 even if saved in release 17.4-2019 2357413 ALLEGRO_EDITOR DATABASE Import Sub-Drawing (clipboard) stops responding with Venture license: Completes with warning using PCB Designer license 2037361 ALLEGRO_EDITOR DFM DRC not flagged for soldermask features drawn with a line to pin, via, or shape soldermask features 2079204 ALLEGRO_EDITOR DFM Enabling option to update analysis mode and run DesignTrue DFM wizard causes PCB Editor to exit 2087181 ALLEGRO_EDITOR DFM DFM reporting false positive hole to hole with stacked microvias 2272112 ALLEGRO_EDITOR DFM Mask: Exposed etch area does not work for cline 2341080 ALLEGRO_EDITOR DRAFTING Allegro PCB Editor crashes on moving module 2348334 ALLEGRO_EDITOR DRAFTING Allegro PCB Editor crashes on Component Move 2271904 ALLEGRO_EDITOR DRC_CONSTR DRC missing for static shape which has an overlap with Route Keepout 2341989 ALLEGRO_EDITOR DRC_CONSTR Allegro PCB Editor crashes while performing Update DRC. 2180397 ALLEGRO_EDITOR EDIT_ETCH OrCAD/Allegro PCB Editor stops responding during add route 2185709 ALLEGRO_EDITOR EDIT_ETCH Film Area Report stops responding 2341753 ALLEGRO_EDITOR EDIT_ETCH Random crash of Allegro PCB Editor 2267702 ALLEGRO_EDITOR EDIT_SHAPE 'Edit - Split Plane - Create' crashing Allegro PCB Editor 2175472 ALLEGRO_EDITOR GRAPHICS Infinite cursor disappears when dragging a component to a new location. 2184194 ALLEGRO_EDITOR INTERACTIV New Via Array command usage model issues: Clicking to place vias leads to selection of shapes 2242133 ALLEGRO_EDITOR INTERACTIV Line arc with line font and width not displaying correctly 2244420 ALLEGRO_EDITOR INTERACTIV Highlight SOV is not flagging clines that are within sov_spacing 2293704 ALLEGRO_EDITOR INTERACTIV "Oops" command during 'add rarc' command does not revert back to snap grid of cursor 2304773 ALLEGRO_EDITOR INTERACTIV Cross-probe with Capture prevents subsequent part selection in Placement Edit Mode 2309994 ALLEGRO_EDITOR INTERACTIV Place -> Via array cannot be placed after preview by clicking on shape in release 17.4-2019 2312593 ALLEGRO_EDITOR INTERACTIV Cannot commit Via Array placement within a shape using Single Side option 2315052 ALLEGRO_EDITOR INTERACTIV Cross-probing issue when multiple parts are highlighted in Capture, sometimes not highlighted in PCB Editor. 2321401 ALLEGRO_EDITOR INTERACTIV Cross-probing issue when selecting multiple parts in OrCAD Capture: Does not highlight those in PCB Editor 2324879 ALLEGRO_EDITOR INTERACTIV Rotate with function key followed by 'ix' moves component to unexpected location 2334085 ALLEGRO_EDITOR INTERACTIV Data tips not appearing if cursor moved quickly to next element. 2346770 ALLEGRO_EDITOR INTERACTIV Unable to place Via array on shape with Array Parameters "Type" as "Single Side" 2347531 ALLEGRO_EDITOR INTERACTIV Copy command results in wrong location while using 'oops' followed by new position in release 17.4 2360755 ALLEGRO_EDITOR INTERACTIV Rotate with funckey moves Symbol 2366514 ALLEGRO_EDITOR INTERACTIV Cross-probe issue in PCB Editor and Capture CIS in release 17.4-2019, HotFix 012: No element found 2132582 ALLEGRO_EDITOR IN_DESIGN_ANA Messaging in command window does not appear in the journal file. 2306827 ALLEGRO_EDITOR IN_DESIGN_ANA Rise Time and GeoWindow max value limitation to 1000mil and 1000ps 2121233 ALLEGRO_EDITOR IPC Exporting IPC2581 from board is not including tolPlus and tolMinus for thickness of TOP and BOTTOM 2295545 ALLEGRO_EDITOR PAD_EDITOR Import of XML for pad stacks not working as expected: Pad files not generated 2286761 ALLEGRO_EDITOR PLACEMENT Not able to place via array around void in release 17.4-2019 while it is working fine in release 17.2-2016. 2309866 ALLEGRO_EDITOR PORTING Allegro PCB Editor performance issue - slowness with Xorg high CPU occupancy rate 2350452 ALLEGRO_EDITOR SCRIPTS Incorrect table (vertical) header popup in release 17.4-2019 2125268 ALLEGRO_EDITOR SHAPE When shape outline is located at specific area, shape is not working correctly. 2342307 ALLEGRO_EDITOR SHAPE Performing operations such as voiding on shape gives error (SPMHA1-507) stating PolyBool has hit an assert 2308042 ALLEGRO_EDITOR UI_FORMS Color dialog text hidden by checkbox in Allegro PCB Editor light theme 2318019 ALLEGRO_EDITOR UI_FORMS Allegro displays garbled text 2338953 ALLEGRO_EDITOR UI_FORMS Scroll zoom and arrows pan do not work when certain commands are active 2345208 ALLEGRO_EDITOR UI_FORMS Change event does not work well in String field of Grid in form 2351653 ALLEGRO_EDITOR UI_FORMS Cannot switch to other alias or funckey unless command is canceled after setting Alias or funckey for zcopy shape 2353126 ALLEGRO_EDITOR UI_FORMS The POPUP fields in Test Form have a triangle sign 2363394 ALLEGRO_EDITOR UI_FORMS Padpath text hidden in Allegro PCB Editor in light theme 2257512 ALLEGRO_EDITOR UI_GENERAL Split view Horizontal and Vertical are mixed up 2262412 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor crashes on using SKILL GRPDrwUpdate() API because GRPDRWDATA->hwnd is not initialized 2265250 ALLEGRO_EDITOR UI_GENERAL Checkbox not center justified in Grid form in release 17.4-2019 2271500 ALLEGRO_EDITOR UI_GENERAL Very slow switching between views with infinite cursor 2293753 ALLEGRO_EDITOR UI_GENERAL Issue with using SKILL in Design Workflow: PCB Editor command does not run if added after SKILL command in a task 2301681 ALLEGRO_EDITOR UI_GENERAL The Edit>Text command in the layout is creating cursor overlap while editing the text. 2302399 ALLEGRO_EDITOR UI_GENERAL Edit Text display issues with insert mode: Not redrawn after text edit done, showing old removed characters 2315467 ALLEGRO_EDITOR UI_GENERAL The border option does not work for text fields depending on other fields around it 2322601 ALLEGRO_EDITOR UI_GENERAL The cursor disappears when editing a shape area and drag edge if infinite cursor type is being used. 2324334 ALLEGRO_EDITOR UI_GENERAL Menu entry missing using OrCAD Professional or OrCAD Standard license for Tools - Padstack - Refresh 2337176 ALLEGRO_EDITOR UI_GENERAL Visibility pane cannot be correctly resized 2338704 ALLEGRO_EDITOR UI_GENERAL Cyrillic text not shown correctly. 2341742 ALLEGRO_EDITOR UI_GENERAL allgro_lock_toolbar resets on restarting Allegro PCB Editor 2341757 ALLEGRO_EDITOR UI_GENERAL Textbox size is small: Cannot enter value for spacing to align components. 2345084 ALLEGRO_EDITOR UI_GENERAL World view not working correctly and does not display cutout with latest hotfix of release 17.4-2019 2347282 ALLEGRO_EDITOR UI_GENERAL Very slow view loading and redraw in release 17.4-2019 hotfix. 2354524 ALLEGRO_EDITOR UI_GENERAL Large space in command line between command prompt and typed text 2356220 ALLEGRO_EDITOR UI_GENERAL Window size is bigger in release 17.4-2019 compared to release 17.2-2016 because of white space 2356985 ALLEGRO_EDITOR UI_GENERAL Cannot shrink menus to min size 2357540 ALLEGRO_EDITOR UI_GENERAL axlUIWTimerAdd() function not generating elapsed time correctly in release 17.4-2019 2359766 ALLEGRO_EDITOR UI_GENERAL When using Edit > Text in release 17.4-2019, the cursor under the text turns into a gray/white bar 2168386 ALLEGRO_EDITOR ZONES Bend Area also bends the rigid part 2078434 ALLEGRO_PROD_TOOLB CORE Shield Router - cline end caps treated differently than cline-segment end caps 2101020 ALLEGRO_PROD_TOOLB CORE Productivity Toolbox Z-DRC with multiple net classes: script selects only the last two classes in a group 2150291 ALLEGRO_PROD_TOOLB CORE PCB design compare cannot compare Cross-section layer name with space 2075523 ALTM_TRANSLATOR CAPTURE Translation issues with third-party PCB and Schematic 2336558 APD DATABASE AREF degassing for Gerber export 2222216 APD LOGIC Part is not highlighting in Logic -> Edit Part List 2354236 APD UI_GENERAL Manufacture - Artwork: Wire bonds visible when Film view selected 2249404 CAPTURE GENERAL Place Part > Add Library > Browse dialog stop taking key board input after Create PCB Netlist 2199790 CAPTURE NETLISTS Netlisting from command prompt gives different results in release 17.4-2019 and 17.2-2016 2340813 CAPTURE OPTIONS OrCAD Capture changes canvas theme after PDF export 2343788 CAPTURE OPTIONS Export PDF changes color scheme of schematic 2213702 CAPTURE SCHEMATIC_EDI Wire signal, which is part of NetGroup, on top level of a hierarchical design is not shown in signals command results. 2264254 CAPTURE SCHEMATIC_EDI Crystal Report from Capture in release 17.2-2016 does not display Japanese characters correctly 2278930 CLOUD_INFRA COMPONENT_EXT Unable to get parts from third-party Search Provider 2313388 CLOUD_INFRA STARTPAGE Capture starts slowly when Start page is enabled 2332357 CONCEPT_HDL CORE Unable to backannotate or perform 'design sync' from PCB Editor to Capture 2333126 CONCEPT_HDL CORE Design sync fails when the temp folder is missing in root directory 2306359 CONSTRAINT_MGR ANALYSIS RPD Match Group DRC errors occur after refreshing symbol for silkscreen corrections. 2239908 CONSTRAINT_MGR CONCEPT_HDL Cross-probe is not enabled in pre-select and post-select mode in Allegro Design Entry HDL. 2307873 CONSTRAINT_MGR CONCEPT_HDL Cross probing disabled in PCB Editor when adding net to a Class in Constraint Manager. 2238753 CONSTRAINT_MGR DATABASE Pin delays in Constraint Manager showing 3 digits resolution even if pin delay is defined with 4 digits 2351214 CONSTRAINT_MGR ECS_APPLY Importing constraint file in OVERWRITE mode does not delete some ECSETS permanently 2226652 CONSTRAINT_MGR UI_FORMS Release 17.4-2019, Constraint Manager: Height of column headers is too large 2226663 CONSTRAINT_MGR UI_FORMS Release 17.4-2019, Constraint Manager: Cannot auto set column width by double-click 2341522 CONSTRAINT_MGR UI_FORMS Release 17.4-2019: Filtering in CM for Prefix or Suffix does not work 2251671 PCB_LIBRARIAN SYMBOL_EDITOR Drawing or custom shape shows small overlap after reset origin 2306865 PSPICE LIBRARIES QVBICN model issue: Model and implementation pin mismatch and part moved to different library 2345948 PSPICE LIBRARIES Default PSpice component cannot be placed from PSpice Search 2346793 PSPICE LIBRARIES PSpice install has issues finding "XFRM_NONLIN..." parts. 2320996 PSPICE TI_CONTRACT Library update causes simulation errors (ORPSIM-15115 and ORPSIM-15107) 2358318 PULSE ADHOC Allegro System Capture crashing when copying or pasting part or adding new part to design 2359260 PULSE ADHOC Commits are denied and incorrect status/versions displayed in Project pane 2341542 PULSE CORE Versions from Pulse Server using FQDN & Intermediate Cert. Authority (Atom): Control & ad hoc collaboration not working 2262023 PULSE UNIFIED_SEARC Some object types being ignored during release 17.2 to 17.4 EDM database uprev 2356310 PULSE UNIFIED_SEARC Unified Search text color should be much darker in the results section 2329757 PULSE VERSION_ON_SA Pulse tray not launching 2311689 SCM OTHER SCM crashes during port assignment 2339272 SIP_LAYOUT UI_FORMS Latency observed in APD Plus in release 17.4-2019 when running SKILL code 2345888 SIP_LAYOUT WLP Advanced thieving patterns in .gds shifted after stream out 2356097 SIP_LAYOUT WLP Importing external DRCs results in error 1972290 SYSTEMSI COMMON case-insensitive in mcp header editor 2139994 SYSTEM_CAPTURE CAPTURE_IMPOR Importing OrCAD Capture designs fails for spaces in package name 1814813 SYSTEM_CAPTURE COMPONENT_BRO System Capture session log should specify the CDS_SITE path for the current session 2089112 SYSTEM_CAPTURE CONSTRAINT_MA Constraints are imported as read-only in System Capture from a DE-HDL design 2242032 SYSTEM_CAPTURE CONSTRAINT_MA XNets issues in designs migrated from release 17.2-2016: Cannot add XNets across some resistors after removing 2334411 SYSTEM_CAPTURE HSS_DESIGNEDI Packaging Options for Block dialog, Reference Designators tab: Sample text for both suffix and prefix is the same 1893897 SYSTEM_CAPTURE IMPORT_DEHDL_ Notes in Japanese from DE-HDL designs do not import correctly into System Capture 1983793 SYSTEM_CAPTURE IMPORT_DEHDL_ The ground symbol differs from the power symbol 2025950 SYSTEM_CAPTURE IMPORT_DEHDL_ Broken connectivity on imported ground symbols 1969979 SYSTEM_CAPTURE MISCELLANEOUS 'Power_Group' property not working correctly with System Capture 2006600 SYSTEM_CAPTURE NAVLINKS Placement of navigation links: placed on top of port/off page symbol and inconsistent alignment 2018961 SYSTEM_CAPTURE PERFORMANCE Moving objects and/or groups of objects is very sluggish 2084693 SYSTEM_CAPTURE PERFORMANCE Performance improvement required in System Capture 2114146 SYSTEM_CAPTURE PERFORMANCE Design takes a good amount of time to open 1902347 SYSTEM_CAPTURE PRINT Prints all sheets if one sheet is specified as the print range 2182607 SYSTEM_CAPTURE PRINT System Capture crashing while trying to print 2342128 SYSTEM_CAPTURE PRINT The right edge of the options area is cutoff 2106307 SYSTEM_CAPTURE PROPERTY_EDIT An orphaned VOLTAGE property gets attached to the page border 2080707 SYSTEM_CAPTURE SELECTION_FIL Cannot select component that has a block shape drawn around it. 2141023 SYSTEM_CAPTURE SELECTION_FIL Place drawing objects behind the components 2041272 SYSTEM_CAPTURE SMART_PDF Smart PDF displays extra box outline if component is selected 2065768 SYSTEM_CAPTURE SMART_PDF Custom Variable in Table Object not getting passed to PDF 2269518 SYSTEM_CAPTURE SMART_PDF PLM system cannot process older versions of Smart PDF files 2298673 SYSTEM_CAPTURE SMART_PDF Smart PDF crashing when Remote Desktop Connection is used 2318787 SYSTEM_CAPTURE SYMBOL_GRAPHI Pin numbers overlap bubble pin stubs 2082594 SYSTEM_CAPTURE UI Component Replace should seed the Component Browser with the part's existing properties 2218534 SYSTEM_CAPTURE UI 'Auto Create Differential Pairs' command missing from the Tools menu 2221714 SYSTEM_CAPTURE UI 'Tools - Auto Create Differential Pairs' menu option is missing 2269532 SYSTEM_CAPTURE UI Voltage values missing and incorrect names displayed for power symbols 2274042 SYSTEM_CAPTURE UI Bus tap bit number XY location and symbol colors changing 2354836 SYSTEM_CAPTURE UI Moving objects causes it to appear very far off the page 2361110 SYSTEM_CAPTURE UI Moving a border shape with a text box inside causes both to disappear 2193445 SYSTEM_CAPTURE VARIANT_MANAG Box object prevents selecting a part in the variant view 2283596 SYSTEM_CAPTURE VERSION_ON_SA Misleading message displayed when a user did not have the required privileges 2010029 SYSTEM_CAPTURE WIRING Zoom is too slow when zooming into a smaller area 2209521 SYSTEM_CAPTURE WIRING Scalar net name 'synonym' wins and is assigned to bus 2290743 SYSTEM_CAPTURE WIRING ALLOW_4WAY_JUNCTION directive not working as desired. 2340292 SYSTEM_CAPTURE WIRING Net names move automatically when connecting a named net with an unnamed net. 2253244 TOPXP AMI_BUILDER Capability to build standalone Tx or Rx AMI model in Parallel Bus Analysis workflow 2296478 TOPXP GUI Auto-shorting causes duplicate SPICE R element 2305071 TOPXP GUI Difference in results at Tx power with same setup in release 17.2-2016 and release 17.4-2019 2188372 TOPXP SYSTEMSI Channel Simulator results incorrect when IBIS CLK model is different for P/N buffer outputs 2218575 TOPXP TCL Provide Tcl support for editing AMI model parameters in Topology Explorer 2356260 TOPXP TCL Topology Explorer - Tcl commands to automate the entire Sweep Simulation needed Fixed CCRs: SPB 17.4 HF012 10-30-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2324284 ADV_PKG_ROUTER OTHER APR fails to route and does not use the BBVias. 2346605 ADW ADWSERVER Librarian license incorrectly checked out by data nodes during LiveBOM creation 2317952 ALLEGRO_EDITOR 3D_CANVAS Allegro 3D Canvas does not show STEP models placed on paste mask correctly 2192222 ALLEGRO_EDITOR DFM Allegro PCB Editor crashed during check 'Mask' with the setting of 'Via Partially Covered With Mask Opening' 2197203 ALLEGRO_EDITOR DFM Wrong alert on Soldermask sliver checking 2280806 ALLEGRO_EDITOR DFM Importing netlist results in error related to illegal subclass (SPMHNI-234) 2262559 ALLEGRO_EDITOR DRC_CONSTR Copper Features: Minimum Acid traps Angle gives false DRC 2319385 ALLEGRO_EDITOR INTERACTIV Find by Query for Via structures is not working with Symbol field filter 2279179 ALLEGRO_EDITOR PLOTTING File> Plot ignores the printer setup properties and always prints in Portrait format. 2306419 ALLEGRO_EDITOR PLOTTING File -> Plot -> Properties only accepts 'Portrait' and not 'Landscape' 2333930 ALLEGRO_EDITOR PLOTTING The File> Plot always prints PCB in portrait 2327088 ALLEGRO_EDITOR SHAPE Design Sync gets a SAV file reported but there is no information about the cause of the problem in netrev.lst 2331947 ALLEGRO_EDITOR SHAPE When adding shape, pressing the 'Shift' key ends the process 2339008 ALLEGRO_EDITOR STREAM_IF Stream import view layers give error 2328322 APD DRC_CONSTRAIN Database getting corrupted during artwork creation even after running DBDoctor. 2280535 APD REPORTS About the missing fillets report result: Ignore fillets not generated inside via regular pad area 2323629 CAPTURE OTHER Product unusable with DSN file: Operations have significant delays and application stops responding 2261147 CONSTRAINT_MGR ANALYSIS Setting "Mechanical drill hole to conductor spacing" does not flag DRC 2330712 CONSTRAINT_MGR DATABASE Physical Constraints Set value cannot be modified 2333755 CONSTRAINT_MGR SCHEM_FTB CM simplified out-of-sync pop-up form has clipped text 2235714 CONSTRAINT_MGR UI_FORMS Using the 'Change all design unit attributes...' pop-up menu option changes only the Min BB Via Gap value 2288109 CONSTRAINT_MGR UI_FORMS Column sort is not working for match group 2306092 CONSTRAINT_MGR UI_FORMS Display Constraints shows empty constraints in Constraint Manager 2332795 CONSTRAINT_MGR UI_FORMS CMGR Worksheet columns are not sorted as per the columns definitions 2326995 PCB_LIBRARIAN SYMBOL_EDITOR Graphics and pin number locations are incorrect 2280766 PSPICE MODELEDITOR Error while converting Verilog-A model 2285008 PSPICE MODELEDITOR Model Editor crashes if file name does not match with IBIS model file name 2346048 PULSE ADHOC Importing or File New Block as a designer working on a design that has been shared does not work 2346643 PULSE ADHOC System Capture crashes when adding a part 2214054 PULSE UNIFIED_SEARC Unified Search does not honor operating system HTTP proxy settings 2325635 PULSE UNIFIED_SEARC Errors in Unified Search (vista) using customer database 2326089 PULSE UNIFIED_SEARC Unified search does not show EDM parts and gives error (SPPSUN-1) 2329750 PULSE VERSION_ON_SA Live BOM data disappearing from migrated DE-HDL design with variants 2319690 SIP_LAYOUT EDIT_ETCH Allegro SiP Layout XL - Auto-I Breakout Closest End excessive run time: Takes long time to complete 2320336 SIP_LAYOUT EDIT_ETCH Auto-Interactive Pin Swapping /Auto Breakout cannot route in design 2333679 SIP_LAYOUT INTERACTIVE Add Offset Via Angle Field 2344732 SYSTEM_CAPTURE DESIGN_CORRUP Page cannot be loaded because the design database is corrupt 2342258 SYSTEM_CAPTURE MISCELLANEOUS System Capture is impacting PCB Editor GUI Readability by Setting QT_SCALE_FACTOR 2337610 SYSTEM_CAPTURE PART_MANAGER System Capture crashes when updating a part with changed PACK_TYPE and Symbol 2341550 SYSTEM_CAPTURE VERSION_ON_SA Projects migrated from HotFix 002 to HotFix 010 have slow performance 2341591 SYSTEM_CAPTURE WIRING Moving wire segments still leaves odd pieces of wires Fixed CCRs: SPB 17.4 HF011 09-30-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2313464 ADV_PKG_ROUTER OTHER APR fails to route because no routing path exists between pins 2321955 ADW COMPONENT_BRO UCB with SSL and variable CDS_ENABLE_UCBCLIENT_DOWNLOAD 2295605 ALLEGRO_EDITOR DFM Pin to shape same net DRC is not working 2325628 ALLEGRO_EDITOR DFM DRC Browser 'Layer Visibility' function is not working 2142093 ALLEGRO_EDITOR SHAPE Shape not updating automatically due to issue with cline void oversize: Manual "update to smooth" required 2300747 ALLEGRO_EDITOR SHAPE HotFix 008: 'Shift' cancels add shape 2312838 ALLEGRO_EDITOR SHAPE Unable to use 'Shift' while using the command 'shape add' 2324592 ALLEGRO_EDITOR SHAPE When adding shape, selecting the 'Shift' key ends the process 2234999 ALLEGRO_EDITOR UI_FORMS Weird behavior of license usage log functionality in release 17.4: Cannot see complete report and error on closing 2304892 ALLEGRO_EDITOR UI_GENERAL 'File > Save As' does not prompt for confirmation to override file 2309890 ALLEGRO_EDITOR UI_GENERAL "Save As" command overwrites existing files without warning. 2317739 ALLEGRO_EDITOR UI_GENERAL DML model does not load in SigXplorer 2297096 APD DFA The Minimum Shape Width check may not report an error. 2197727 CAPTURE PROJECT_MANAG 'Save Project As' to UNC path does not work properly: Saves directory locally 2306341 CONCEPT_HDL CORE NetGroup member removed/lost after 'Save Hierarchy' 2319615 CONSTRAINT_MGR CONCEPT_HDL DE-HDL CM-defined Region Class to Class Spacing constraints not exporting to Allegro PCB Editor 2226706 CONSTRAINT_MGR UI_FORMS Release 17.4: Constraint Manager font not sharp (appears fuzzy) 2299543 CONSTRAINT_MGR UI_FORMS Analysis Mode Electrical Form distorted 2305020 CONSTRAINT_MGR UI_FORMS Text is overlapped on the Electrical Constraints tab of Analyze Modes form of Constraints Manager with light theme. 2230544 PULSE R2PLM Publish to manufacturing does not launch if project path begins with an underscore 2308952 PULSE R2PLM Generate button inaccessible if there are many utilities on the Generate page 2323902 SIP_LAYOUT INTERACTIVE Rotation occurs randomly when copying objects multiple times. 2325542 SIP_LAYOUT INTERACTIVE Function key rotate of copied part does not show preview correctly 2328253 SIP_LAYOUT INTERACTIVE Rotate setting not being applied when copying and pasting symbol 2305709 SIP_LAYOUT ORBITIO_IF APD crashes when selecting the 'Help' button in the 'Orbit import' dialog 2310340 SIP_LAYOUT OTHER SiP Layout - Die Properties - adding shrink to a die at design coordinates other than 0,0 results in change of origin 1962599 SYSTEM_CAPTURE NAVLINKS The $XR property placeholders are not honored and orange dots appear at their locations 2037440 SYSTEM_CAPTURE NAVLINKS NavLinks location is reset after moving offpage body Fixed CCRs: SPB 17.4 HF010 09-5-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2294970 ADW ADWSERVER ERROR (SPDWSRV-00033): Error found while invoking the IDAO service. 2301168 ADW ADWSERVER Java cryptography extension policy needs to be updated to support AES256 ciphers 2177655 ALLEGRO_EDITOR 3D_CANVAS When the '3d_canvas_skinning' variable is set, the silkscreen layer is missing in 3D Canvas. 2207015 ALLEGRO_EDITOR 3D_CANVAS Silkscreen text is not visible in 3D view when "3d_canvas_skinning" variable is set. 2242378 ALLEGRO_EDITOR 3D_CANVAS Package Geometry/Silkscreen_Top is not visible in the 3D Package editor. 2250668 ALLEGRO_EDITOR 3D_CANVAS Skinning in 3D Canvas removes silkscreen layer: Needs to be included 2289629 ALLEGRO_EDITOR 3D_CANVAS Package Geometry/Silkscreen Layer is missing when outer layers option is selected in 3D Canvas 2299582 ALLEGRO_EDITOR 3D_CANVAS 3D Canvas - Collision Detection - Wrong object is highlighted 2294263 ALLEGRO_EDITOR DFM Same net DRC is not working from output SMD pin to cline segment 2305809 ALLEGRO_EDITOR DFM Go To Source of DRC Browser does not highlight the constraint 2305819 ALLEGRO_EDITOR DRC_CONSTR DRC Browser: Random crash when cross probing 2289336 ALLEGRO_EDITOR GRAPHICS Via pad is not visible when dynamic suppress pad and unused pad ignore is set 2293351 ALLEGRO_EDITOR INTERFACES Export PDF does not show the drill holes for the suppressed padstacks. 2307857 ALLEGRO_EDITOR UI_FORMS Carriage Return not returned from the form field of type STRFILLIN in release 17.4 2240985 ALLEGRO_EDITOR UI_GENERAL Window Resize: Cannot click User Preferences Editor buttons because window is not visible completely 2266471 ALLEGRO_EDITOR UI_GENERAL Padstack not rendered correctly in footprint 2282289 ALLEGRO_EDITOR UI_GENERAL Reduce spacing between colors in Options pane during Assign Color command 2288844 ALLEGRO_EDITOR UI_GENERAL Visibility pane should be dynamically resized 2302483 ALLEGRO_EDITOR UI_GENERAL Linux Terminal Feedback Noise in release 17.4: Too many harmless messages hide the important messages 2304239 ALLEGRO_EDITOR UI_GENERAL Readjusting distances of color box in Assign Color: Large distance between color boxes 2308786 ALLEGRO_EDITOR UI_GENERAL Display>Measure not showing Air Gap between via and cline segment 2313274 ALLEGRO_EDITOR UI_GENERAL The 8-bit Cyrillic support in SKILL code in release 17.4 is incorrect: Some functions do not support Cyrillic 2285840 ALLEGRO_PROD_TOOLB CORE Productivity tool - Report should exclude Part Number with empty value 2312284 APD UI_FORMS Advanced Metal Fill Offset issue due to default max string length field in adv_thieving_msm.form 2317196 APD UI_GENERAL APD Plus, release 17.4: Dialog size, placement, and text size/readability settings not remembered on next run 2289901 CAPTURE PCBFLOW 'PCB - Design Sync' crashes Capture 2307531 CAPTURE PCBFLOW 'Launch Design Sync' in Capture: Cannot select a new board name for output board file 2257072 CAPTURE SCHEMATIC_EDI Release 17.4: Capture crashes on copy and paste when there is a discrepancy in design cache versions 2264385 CAPTURE SCHEMATIC_EDI Copying symbols with different timestamp makes design crash in release 17.4 2264411 CAPTURE SCHEMATIC_EDI Copy & Paste from one design to another causes a crash 2296369 CAPTURE SCHEMATIC_EDI 'Design - Remove Occurrence Properties' causes Capture to stop responding with memory leak 2308242 CAPTURE SCHEMATIC_EDI Copy/paste of a part having different versions of Cache entries between two .DSN causes crash. 2291368 CONCEPT_HDL CORE Page missing from TOC 2305195 CONCEPT_HDL CORE Hierarchical design crashes on Save Hierarchy and on page specific Save 2298782 CONSTRAINT_MGR UI_FORMS Release 17.4 CM QT Fonts need to be crisper and easier to read 2307490 CONSTRAINT_MGR UI_FORMS CM on close yes/no/cancel options - Cancel should keep UI open 2315726 CONSTRAINT_MGR UI_FORMS Go To Source selects cell, but leaves previously selected row highlighted 2302946 ORBITIO ALLEGRO_SIP_I Import of OrbitIO design with contact device results in die pins at both bump and ball layers 2284343 PULSE UNIFIED_SEARC "Pulse Datamart" service could not be started error when updating Pulse manager 2286841 PULSE UNIFIED_SEARC "Pulse Datamart" service could not be started error when updating Pulse manager 2309963 PULSE UNIFIED_SEARC Pulse server datamart issue: Error (SPDWSRV-000111) when opening search provider window 2300291 SYSTEMSI ENG_PBA SystemSI crashes if IBIS model contains empty pin parasitics 2227842 SYSTEM_CAPTURE IMPORT_DEHDL_ Page number specified in the violations window is incorrect 2229177 SYSTEM_CAPTURE IMPORT_DEHDL_ Unable to cross-probe from the violations window to the schematic page 2247801 SYSTEM_CAPTURE IMPORT_DEHDL_ Import DE-HDL sheet does not have the CDS_CELL property in power/gnd net. 2286798 SYSTEM_CAPTURE SHORTCUTS CTRL+X does not seem to work when a group of shapes are selected on canvas 2218532 SYSTEM_CAPTURE UI Change Reference Designator dialog not sorting properly 2287180 TOPXP VIA_WIZARD Cannot run Via Wizard in Topology Explorer with some licenses Fixed CCRs: SPB 17.4 HF009 07-30-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2208947 ADW ADW_UPREV Message stating adw_uprev failed but design can be opened 2218343 ADW ADW_UPREV Error message (FM-107) when running adw_uprev to uprev release 17.2 designs to 17.4-2019 2242537 ADW ADW_UPREV Error message (FM-107) for adw_uprev failure when opening release 17.2 design in 17.4-2019 without migrating 2228166 ADW LRM FlowManager and LRM do license existence checks before checking out a license and this causes a performance problem 2268318 ADW MODEL_MANAGEM Not able to change key property to injected property in EDM schematic model classification 2296401 ADW PART_MANAGER Part line item comes in manual sync once part number is added on the instance 2255047 ADW SHOPINGCART Adding parts from shopping cart replaces '<>' with 'CDS_NA' causing Export Physical to fail 2227573 ADW TDA Licensing checks making DE-HDL launch and runtime performance poor with WAN-based license server 2281586 ALLEGRO_EDITOR DATABASE axlXSectionCreate() command is not working properly while defining 'x_position' for the g_option argument. 2279904 ALLEGRO_EDITOR DFM Design True DFM Wizard crashing 2279237 ALLEGRO_EDITOR INTERFACES 'File - Export - PDF' does not export .pdf format correctly if output filename has '.' 2106202 ALLEGRO_EDITOR INTERFACE_DES Rats disappear when placing parts after moving the parts out of outline or far from original placement 2280208 ALLEGRO_EDITOR PLACEMENT Status shows Busy after selecting Place Interactive 2264528 ALLEGRO_EDITOR REFRESH Single via replace mode replacing all instances of selected padstack 2281639 ALLEGRO_EDITOR SCRIPTS Script does not change the color of some items in Color dialog 2284318 ALLEGRO_EDITOR UI_FORMS Allegro PCB Editor crashes when using SKILL function in release 17.4-2019 2290749 ALLEGRO_EDITOR UI_FORMS Button displays garbled text when customized for Chinese. 2233441 ALLEGRO_EDITOR UI_GENERAL Release 17.4: For Chinese OS, Menu Height is large and OK button cannot be clicked as it is beyond screen 2277717 ALLEGRO_EDITOR UI_GENERAL Command line history command substitutes the present command 2277801 ALLEGRO_EDITOR UI_GENERAL Relative mode not indicated in status bar: Status indicator shows A for both Absolute and Relative 2282093 ALLEGRO_EDITOR UI_GENERAL Resize window 2284657 ALLEGRO_EDITOR UI_GENERAL "axlUIPrompt" SKILL function does not recognize two-byte Korean character in release 17.4-2019 2284874 ALLEGRO_EDITOR UI_GENERAL GUI text and forms are zoomed since I installed the S007 on 17.4 2288992 ALLEGRO_EDITOR UI_GENERAL The Super Filter list in the Status Bar pop-up does not follow the Application Mode setting 2290666 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor stops responding for 'Import - Logic/Netlist' after installing release 17.4-2019, HotFix 007 2291252 ALLEGRO_EDITOR UI_GENERAL axlUIPrompt displays unknown string. 2291677 ALLEGRO_EDITOR UI_GENERAL Window size in release 17.4-2019, HotFix 007 prevents access to the OK button. 2293731 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor crashes when updating symbol with autosave variable set 2286688 ALLEGRO_LIB_CRT CORE Library Creator Error Object has no attribute in release 17.4-2019 2284127 APD DFA Dynamic Shape creates a very narrow gap within its own Shape. 2257143 CAPTURE LIBRARY The libraries added to Place>Part but missing part configuration library information not listed in INI after restart 2290805 CAPTURE LIBRARY The libraries added to Place>Part are missing 2283362 CAPTURE OTHER Localization of CIS icons menu in release 17.4-2019: Issues on changing menu character to Japanese 2285721 CAPTURE PCBFLOW Design operations become very slow with online DRC enabled in large designs 2217351 CAPTURE PROJECT_MANAG Release 17.4-2019 'Project manager' button does not switch to PM tab in tabbed document view 2295601 CAPTURE PROJECT_MANAG Save icon does not save changes when PM window is floating. 2281559 CAPTURE STARTPAGE Cannot disable Capture Start page after HotFix 007 2281567 CAPTURE STARTPAGE Cannot disable Start page in release 17.4-2019, HotFix 007 2283395 CAPTURE STARTPAGE Cannot turn off Start page in Capture in release 17.4-2019 HotFix 007 2283458 CAPTURE STARTPAGE New Start page disable: Cannot turn off Start page 2285738 CAPTURE STARTPAGE Cannot disable Start page in release 17.4-2019, HotFix 007 2293361 CAPTURE STARTPAGE Cannot disable the Start page in Capture in release 17.4-2019, HotFix 007 2297246 CAPTURE STARTPAGE Cannot disable Start page in release 17.4-2019 2302056 CAPTURE STARTPAGE Cannot disable Start page in OrCAD Capture 2277754 CONCEPT_HDL CHECKPLUS CheckPlus library() predicate broken and causing a crash 2277547 CONSTRAINT_MGR ACC Differential pair nets are not grouped when creating a MatchGroup by ACC. 2300992 CONSTRAINT_MGR INTERACTIV Release 17.4: CM filtering for an ECset in the Referenced Electrical Constraint column takes a long time 2285732 CONSTRAINT_MGR OTHER Purging all vias from CM via list causing crash 2298503 CONSTRAINT_MGR OTHER PCB Editor crashes when purging vias 2262409 CONSTRAINT_MGR SCM Changing a Custom Property value in CM changes the RefDes 2302461 CONSTRAINT_MGR UI_FORMS 174 CM Remove References form Yes to All/No to All acts like Yes/No 2180467 PSPICE AA_MC PSpice AA unable to ask for missing license 2235328 PSPICE AA_MC PSpice Advance Analysis gives license error (ORPSPAA-2111): Does not ask for missing license 2262992 PSPICE AA_MC Licensing break in release 17.4-2019 for PSpice Advance Analysis: License error though license is available 2271170 PSPICE AA_MC Product choice not displayed on running Advanced Analysis with OrCAD PCB Designer professional w/PSpice 2273633 PSPICE AA_MC PSpice AA unable to ask for missing license 2283338 PSPICE ENVIRONMENT Integrate PSpice localization related issues - translated Japanese menu 2273235 PSPICE LIBRARIES QVBICN model not working: Pin not found error 2277851 PULSE LIVEBOM Bom CSV file has html tags when configuration has been saved 2273079 PULSE UNIFIED_SEARC Unified Search AML data shows MFG as undefined 2278441 PULSE UNIFIED_SEARC URL links are not active in the AML tabs displayed in Unified Search 2281108 PULSE UNIFIED_SEARC Make Datasheet URL Active in Unified Search - AML/ MFG PN Part row/ record 2282793 PULSE UNIFIED_SEARC Cannot log in with Cadence login because of "<" in password 2139998 SYSTEM_CAPTURE CAPTURE_IMPOR BOM utility fails with packaging error (SPCODD-412) 2292607 SYSTEM_CAPTURE DRC Old signals appearing as single node and unconnected net errors from DRC analysis 2222549 SYSTEM_CAPTURE PROPERTY_EDIT Pins numbers are overlapping with the symbol boundary 2242136 SYSTEM_CAPTURE PROPERTY_EDIT Pin numbers overlap symbol text 2290107 SYSTEM_CAPTURE PROPERTY_EDIT Pin numbers overlap bubble pin stubs 2251799 SYSTEM_CAPTURE UI PCB Editor opens with large DPI scaling when started from System Capture 2153206 SYSTEM_CAPTURE UNIFIED_SEARC Local worklib part not shown in Part Information Manager 2289181 SYS_RELIABILITY SCH_AUDIT Incorrect reporting of GND as power and Power as GND in the design audit 2289185 SYS_RELIABILITY SCH_AUDIT Reliability Module reporting net connected with no driver for net connected with pull up 2292486 TOPXP GUI Topology Explorer FFE Sweep: Cannot sweep TX FEE settings 2281577 TOPXP PARALLELBUS_A Voltage probe points in System SI: Inconsistent probe points display 2294958 TOPXP SWEEP_MANAGER TopXplorer stimulus pattern does not change in sweep Fixed CCRs: SPB 17.4 HF008 07-7-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2238259 ADW ADWSERVER Designer server is shutting down and cannot be restarted 2252163 ADW ADWSERVER Designer server has stopped working several times 2241655 ADW DBEDITOR Version uprev of model with every check-in if the model is renamed 2280137 ALLEGRO_EDITOR 3D_CANVAS 3D Canvas to merge the line segments and overlapping lines and shapes 2267392 ALLEGRO_EDITOR COLOR "Last" button or "color View restore" in Visibility pane does not restore last View 2264924 ALLEGRO_EDITOR DFM Manage DRC between design Outline and a mechanical padstack 2264957 ALLEGRO_EDITOR DFM Non-plated holes DRC with mechanical hole does not work 2264964 ALLEGRO_EDITOR DFM Manage Thru_pin non plated in DFF: DRC for Design_Outline and thru pin non-plated 2265665 ALLEGRO_EDITOR DFM Enhance 'Allow overlapping Pad/Shape on same net' when Via and Pin are on same shape 2267321 ALLEGRO_EDITOR DFM Enhance DFF Copper Spacing Trace to Shape to manage tear drops 2272178 ALLEGRO_EDITOR DFM Mask Slivers check does not work when working on a shape which is voided inside 2272193 ALLEGRO_EDITOR DFM DFF Mask check does not work when two shapes are superposed 2262138 ALLEGRO_EDITOR DRC_CONSTR Testpoint to No Probe Check issue: Testpoint giving DRC against TOP NO PROBE 2251943 ALLEGRO_EDITOR DXF DXF out result is different between release 16.6 and release 17.2-2016. 2038187 ALLEGRO_EDITOR GRAPHICS Negative plane display should be WYSIWYG or as close to it as possible. 2259540 ALLEGRO_EDITOR INTERACTIV Find Pane settings not remembered when using Copy in a Package Symbol. 2252802 ALLEGRO_EDITOR INTERFACES Intensity of color changes on subsequent pages with PDF Export in black and white 2267963 ALLEGRO_EDITOR INTERFACES Difference in PDF between HotFix 003 and HotFix 006: Active layer color displayed for assembly layer text 2269613 ALLEGRO_EDITOR INTERFACES File> Export> PDF does not output panel imposition outlines. 2270690 ALLEGRO_EDITOR INTERFACES Export PDF: Page Setup tab settings for Global Text Size only appear to adjust the text position 2270695 ALLEGRO_EDITOR INTERFACES Custom colors assigned in Color 192 used even if 'Hide custom colors' is enabled 2273868 ALLEGRO_EDITOR INTERFACES PDF Export does not respect layer ordering 2273934 ALLEGRO_EDITOR INTERFACES PDF Export does not respect disabled custom colors 2240781 ALLEGRO_EDITOR NC Slot drill symbol figure issue: Rotation inconsistent with slot drill symbol figure 2251978 ALLEGRO_EDITOR NC Backdrill Chart values have a slight difference from Backdrill Setup and Analysis values 2249364 ALLEGRO_EDITOR OTHER PCB Editor crashes when it is in add connect and Design sync is run in Capture. 2265146 ALLEGRO_EDITOR PAD_EDITOR Cannot save padstack after shape symbol with offset is uprevved from release 16.6 to release 17.2-2016 2265711 ALLEGRO_EDITOR PAD_EDITOR Padstack Editor creating horizontal oblong padstacks with incorrect figure name OBLONG_X 2284557 ALLEGRO_EDITOR SCRIPTS Close icon in Viewlog is misleading and should be replaced with a different icon 1490414 ALLEGRO_EDITOR UI_GENERAL Problems on 4K monitor - creates ghost image 2043825 ALLEGRO_EDITOR UI_GENERAL Custom toolbar settings are not retained upon restart of Allegro PCB Designer 2090185 ALLEGRO_EDITOR UI_GENERAL UI setting in INI file not retained 2099070 ALLEGRO_EDITOR UI_GENERAL UI setting not working properly: icons missing after restart. 2265390 ALLEGRO_EDITOR UI_GENERAL Mark device using the same substrate as its parent as a contact device 2277457 ALLEGRO_EDITOR UI_GENERAL PCB Editor crashes when importing Parameters with Autosave enabled 2279875 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor crashes on importing logic/netlist on systems with 'auto save' enabled 2281405 ALLEGRO_EDITOR UI_GENERAL PCB Editor constantly crashes with HotFix 007 on importing netlist with Autosave variable enabled. 2281465 ALLEGRO_EDITOR UI_GENERAL The import netlist command crashes PCB Editor when the Autosave variable is enabled 2281588 ALLEGRO_EDITOR UI_GENERAL Import netlist or design sync crashing PCB Editor in HotFix 007 2282280 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor stops responding when running Design Sync with autosave enabled. 2282869 ALLEGRO_EDITOR UI_GENERAL PCB Editor crashes for both design sync and import netlist 2283828 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor crashes while using Design sync or Import Netlist 2283860 ALLEGRO_EDITOR UI_GENERAL PCB Editor crashes when updating symbol with autosave enabled 2284173 ALLEGRO_EDITOR UI_GENERAL PCB Editor crashes on netlist import when set autosave variable is set 2284814 ALLEGRO_EDITOR UI_GENERAL Netlist import not working: PCB Editor saves .SAV file because of problem 2284886 ALLEGRO_EDITOR UI_GENERAL Import netlist crashes PCB Editor 2285633 ALLEGRO_EDITOR UI_GENERAL Allegro PCB Editor crashes during importing netlist in release 17.4-2019, HotFix 007 2288895 ALLEGRO_EDITOR UI_GENERAL PCB Editor stops responding on importing a netlist with Autosave variable enabled in release 17.4-2019, HotFix 007 2289980 ALLEGRO_EDITOR UI_GENERAL PCB Editor crash while importing netlist after installing 17.4 S007 2293132 ALLEGRO_EDITOR UI_GENERAL Cannot import EMN, IDF file into PCB Editor with autosave enabled 2265246 ALLEGRO_LIB_CRT CORE Library Creator Crashes When Importing Sync Records 2284481 ALLEGRO_LIB_CRT CORE View Footprint of Library Creator does not show dimensions 2253631 ALLEGRO_PROD_TOOLB CORE Tolerance check does not work when run from Design Compare 2238048 CAPTURE PROJECT_MANAG Tabbed Project window with library added: no components selected or focus back to first selection on scrolling 2254331 CAPTURE PROJECT_MANAG Unexpected jumping when scrolling in OrCAD Capture Project Manager Window in tabbed form 2254960 CAPTURE PROJECT_MANAG Selecting an entry in Design Cache selects wrong component due to unexpected scroll in Project Manager 2264435 CAPTURE PROJECT_MANAG Selected Project item not selected after scrolling 2264949 CAPTURE PROJECT_MANAG Project Manager automatically scrolling horizontally 2272064 CAPTURE SCHEMATICS Capture not updating inter-sheet references 2221877 CAPTURE SCHEMATIC_EDI PSpice component list has parts from 'eval' library not present in release 2261899 CAPTURE SCHEMATIC_EDI Find command does not search for occurrences of Power nets 2264291 CAPTURE SCHEMATIC_EDI Capture crashes when executing Save Project As when Online DRC is "ON" 2246354 CIS PLACE_DATABAS Warning (ORCIS-6159) pop-up window is blank. 2260508 CONCEPT_HDL CORE dsreportgen crashing when using created template 2262053 CONCEPT_HDL CORE Allegro Design Entry HDL Create Xnet command does not create expected Xnet 2269386 CONCEPT_HDL CORE Design Entry HDL crashes on 'Place - NetGroup - Edit' 2267919 CONSTRAINT_MGR OTHER Not able to add via with the comma "," character in its name in the via list through CM. 1700264 PSPICE ENVIRONMENT PSpice license selection dialog appears in the background when PSpice project opened in Capture 2198272 PSPICE FRONTENDPLUGI Unable to place part from PSpice Part Search window using context menu 'Place symbol' 2277973 PSPICE FRONTENDPLUGI Unable to run simulation after installing HotFix 007 2277987 PSPICE FRONTENDPLUGI Unable to run simulation after installing HotFix 007 2278002 PSPICE FRONTENDPLUGI Unable to run simulation after installing HotFix 007 2278018 PSPICE FRONTENDPLUGI Unable to run simulation after installing HotFix 007 2278678 PSPICE FRONTENDPLUGI Unable to simulate a PSpice project after installing release 17.4-2019, HotFix 007 2292176 PSPICE FRONTENDPLUGI Cannot run simulation after installing HotFix 7 2242028 PULSE SERVER Allegro EDM server stops running very frequently with error message (SPDWSRV-00077) 2280836 SIP_LAYOUT OTHER Undefined padstack layer name: Padstack defined on layer but GUI and show element do not indicate layer 2273305 SIP_LAYOUT WLP Advanced degassing is ignoring conductor same layer spacing for vias 2267448 SPIF OTHER SPIF command window too small and cannot be resized making it literally unusable 2287612 SYSTEM_CAPTURE IMPORT_BLOCK Import of Design Entry HDL design does not retain the connectivity of top-level port group 2286787 SYSTEM_CAPTURE NAVLINKS Navigation links goes into a hung state after editing them on the canvas 2287662 SYSTEM_CAPTURE NETGROUP System Capture not able to draw the connections between port groups 2284801 SYSTEM_CAPTURE UI System Capture displays a very small character size on canvas 2279366 TOPXP GUI Topology Explorer connectivity issue: Incorrect connections and different eye when restarted 2259754 TOPXP SI_EXPLORATIO Simulation results are significantly different between SigXplorer and Topology Explorer Fixed CCRs: SPB 17.4 HF007 05-10-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2247686 ADW CORE Not able to create flow in EDM 2137594 ADW DBADMIN EDM is not allowing to modify step model 2135452 ADW DBEDITOR DBEditor poor performance in high latency networks 2113265 ADW LIBDISTRIBUTI Various DB operations take too long, rebooting server seems to fix the problem 2122941 ADW LIBDISTRIBUTI Lib_dist execution taking too long to run, Capture CIS DBC File appears to be taking most of the time 2127319 ADW LIBDISTRIBUTI Library distribution fails at cisexport function with error (ORCIS-6250) 1975317 ADW PART_BROWSER Space at the end of the line in CDS.LIB results in zero libraries being shown in System Capture library search 2078057 ADW PART_BROWSER Symbol Graphics preview is not available in the Designer Server 2092863 ADW PART_BROWSER Component Browser is not displaying the symbol & footprint preview 2086463 ADW PART_MANAGER System Capture cannot add components when accessing remote machine via Citrix 2092868 ADW PART_MANAGER Release 17.2-2016, HotFix 054: Empty cache.ptf causing injected properties to not to flow from pstchip 2092872 ADW PART_MANAGER System Capture stops responding when importing from DE-HDL 2113226 ADW PART_MANAGER System Capture stops responding while importing DE-HDL sheets 2212406 ADW PART_MANAGER SYSCAP: Part Manager is deleting properties from all instances upon Update 2025147 ADW TDO-SHAREPOIN Design Management stops responding when a board file is deleted and then checked in with the same name 2025201 ADW TDO-SHAREPOIN Getting error message (SPDWSD-20) when logging in to Team Design 2056694 ADW TDO-SHAREPOIN Design Management stops responding on checking in an object with the same name as a previously deleted object 2048086 ALLEGRO_EDITOR 3D_CANVAS Wire bonds are not linked to die pad when component is embedded body down 2051277 ALLEGRO_EDITOR 3D_CANVAS 3D View Vias are Offset from Board in Z direction 2054243 ALLEGRO_EDITOR 3D_CANVAS Plating is not shown on stacked vias in 3D canvas 2054327 ALLEGRO_EDITOR 3D_CANVAS 3D Canvas error: All bend operations are disabled due to licensing and/or DLL installation 2079732 ALLEGRO_EDITOR 3D_CANVAS Enhancement 3D Export: Merge the lines segment and overlapping lines and shapes 2206045 ALLEGRO_EDITOR ARTWORK In the Artwork Control Form, if you name a Film record with a period "." in the title, it fails to create that film 2209200 ALLEGRO_EDITOR ARTWORK Rebuilding apertures without rotation freezes / locks up system with no response. 2244407 ALLEGRO_EDITOR ARTWORK Artwork Control Form> under General Parameters > Apertures > Edit > Auto > With Rotation, the program takes time 637828 ALLEGRO_EDITOR COLOR Line high lights in shape command 1602652 ALLEGRO_EDITOR COLOR Color/Visibility behavior variation using "Enable Layer Select Mode" 2072695 ALLEGRO_EDITOR COLOR Clines of colored nets not colored when 'display_nohighlight_priority' is set 2207580 ALLEGRO_EDITOR COLOR Component color is inconsistent when display_nocolor_dynamics is set. 2056497 ALLEGRO_EDITOR DATABASE Place manual is slow 2194525 ALLEGRO_EDITOR DATABASE DBDoctor message to be more descriptive of the error 2250988 ALLEGRO_EDITOR DATABASE SHAPE' object may not exist on layer 'ROUTE KEEPOUT/INNER_SIGNAL_LAYERS 2096958 ALLEGRO_EDITOR DFA Cannot launch Constraint Manager after assigning CSet and closing 2049681 ALLEGRO_EDITOR DFM DFF check for plating in via should not flag DRC for surface mount testpoint Via 2155060 ALLEGRO_EDITOR DFM Inconsistent behavior in displaying DRCs for Via to Via spacing 2166431 ALLEGRO_EDITOR DFM DesignTrue annular ring 6thru pin pad to mask checks compared to smd pin to mask checks are inconsistent in behavior 2221975 ALLEGRO_EDITOR DFM DFM missing mask reporting mask is missing when pins have a mask geometry overlaying them. 2249498 ALLEGRO_EDITOR DRAFTING When a Symbol with a Dimension is placed on the board, an extra Dimension is added to the Symbol origin. 2250631 ALLEGRO_EDITOR DRC_CONSTR Not able to import the netlist into the attached design. Says illegal DRC element. 1794593 ALLEGRO_EDITOR EDIT_ETCH Unable to deselect the return path vias once it is selected when creating High-speed via structure 2099538 ALLEGRO_EDITOR EDIT_ETCH 'Glossing - Via Eliminate' shifts traces to another layer 2204339 ALLEGRO_EDITOR EDIT_ETCH Diffpair line lost during slide 2208938 ALLEGRO_EDITOR EDIT_ETCH Slide makes one of the diff pair cline invisible 2222047 ALLEGRO_EDITOR EDIT_ETCH Sliding a diffpair in singe trace mode and one of the traces disappear 2233991 ALLEGRO_EDITOR EDIT_ETCH One cline of a differential pair disappears temporarily upon sliding the Diff Pair in Single Trace Mode 2240827 ALLEGRO_EDITOR EDIT_ETCH Cline of a Diff pair net disappears after sliding the other net of the Diff pair. 2245775 ALLEGRO_EDITOR EDIT_ETCH Diffpair slide in single traces 'removes' other trace 1813358 ALLEGRO_EDITOR GRAPHICS Allegro will leave the shape boundary enabled when disabling the etch layer in the Visibility tab 1911613 ALLEGRO_EDITOR GRAPHICS The subclass for boundary class stays on, even if Subclass for Etch Class is turned off from Visibility tab 1966343 ALLEGRO_EDITOR GRAPHICS Shape boundary remains enabled even after turning off the etch layer visibility 2195276 ALLEGRO_EDITOR GRAPHICS Selecting File view is slow 2031883 ALLEGRO_EDITOR INTERACTIV Sub-Drawing: clipboard origin point is not set correctly 2050177 ALLEGRO_EDITOR INTERACTIV Letters need to remain aligned and uniform after performing Boolean ANDNOT operation 2069247 ALLEGRO_EDITOR INTERACTIV DFA bubble on wrong layer after mirroring the part 2103711 ALLEGRO_EDITOR INTERACTIV Placement edit mode RMB rotate leaves ghost image in the background 2136859 ALLEGRO_EDITOR INTERACTIV DFA Problem if we mirror component while placing 2165027 ALLEGRO_EDITOR INTERACTIV Different behavior in Capture when using cross probe to select Power nets. 2240235 ALLEGRO_EDITOR INTERACTIV The design file name changes automatically to board template name while creating new board (wizard). 2244765 ALLEGRO_EDITOR INTERACTIV License 4150+226 does not have AiDT/AiPT in release 17.2-2016 2259800 ALLEGRO_EDITOR INTERACTIV DFA DRC circle not shown on the layer of placement in Placement App Mode 2120420 ALLEGRO_EDITOR INTERFACES Drill Figures is missing in the exported PDF. 2136454 ALLEGRO_EDITOR INTERFACES Export > pdf output is not correct 2116748 ALLEGRO_EDITOR IN_DESIGN_ANA Impedance vision data not available for cline segments for some nets 2138977 ALLEGRO_EDITOR IN_DESIGN_ANA Impedance check results are incorrect and Crosstalk analysis stops running after updating to HotFix 057 2247167 ALLEGRO_EDITOR IN_DESIGN_ANA IDA-IMP, CPL: want the option to export CSV automatically 2222638 ALLEGRO_EDITOR IPC Documentation editor crash with error: Failed to complete the job because of unspecified error 2106425 ALLEGRO_EDITOR NC Disable undersize regular pad and oversize soldermask pad for start layers 2091932 ALLEGRO_EDITOR OTHER Unsupported Prototypes command missing for the OrCAD licenses 2221345 ALLEGRO_EDITOR OTHER Speed up Allegro PCB Editor launch by Removing NG_450 license check for defunct PCB/Package Codesign capability 2257934 ALLEGRO_EDITOR PLACEMENT Getting this error while trying to place component (SPMHGE-626): Symbol TRA_-_TSON-008-0050-000-S is not valid on any l 1001000 ALLEGRO_EDITOR PLOTTING File > Plot in allegro does not plot more then one copy 2234538 ALLEGRO_EDITOR REPORTS Allow Unused Blind/Buried Via report to run as Batch Process through the reports batch command 2222738 ALLEGRO_EDITOR SCHEM_FTB Netrev not completing, showing error for electrical constraints data (pstcmdb.dat) import 2255426 ALLEGRO_EDITOR SCHEM_FTB Netrev is running for hours without closing 1702190 ALLEGRO_EDITOR SCRIPTS ALLEGRO PCB EDITOR script file 1791099 ALLEGRO_EDITOR SCRIPTS Allegro PCB Editor does not terminate when the script is run with '-nographic' 1791267 ALLEGRO_EDITOR SCRIPTS Allegro PCB script does not run in -nograph mode in 17.2 1892520 ALLEGRO_EDITOR SCRIPTS Running Allegro with the -nographic switch hangs due to a script having fillin confirmer 1962010 ALLEGRO_EDITOR SCRIPTS script with -nongraph option 2056857 ALLEGRO_EDITOR SHAPE Shape boundary error by shape parameter 2081946 ALLEGRO_EDITOR SHAPE Shape Update takes twice the time in release 17.2-2016, HotFix 053 as compared to HotFix 047 2104559 ALLEGRO_EDITOR SHAPE PCB Editor crashes while performing shape operation 'andnot' 2108207 ALLEGRO_EDITOR SHAPE No Void Overlap option is not working in AMB 2240996 ALLEGRO_EDITOR SHAPE Detecting Shape Island: Ignored for copied or moved shape 2258758 ALLEGRO_EDITOR SHAPE Allegro crash when routing two signals together. 717389 ALLEGRO_EDITOR SKILL Ability to set and return the Application Mode using SKILL 853160 ALLEGRO_EDITOR SKILL need ability to get and set application modes using SKILL 981446 ALLEGRO_EDITOR SKILL Request the ability to get and set application modes using SKILL 1235409 ALLEGRO_EDITOR SKILL SKILL option to get - the Application mode 1316962 ALLEGRO_EDITOR SKILL SKILL option to switch between the Application mode 1553621 ALLEGRO_EDITOR SKILL Ability to Change Application Modes using SKILL function. 1885442 ALLEGRO_EDITOR SKILL Ability to Change Application Modes using SKILL function. 2080351 ALLEGRO_EDITOR SKILL SKILL determine current application mode 2195645 ALLEGRO_EDITOR THIEVING Thieving pad cannot be added on some areas in the board in latest hotfix but could be added earlier 1721594 ALLEGRO_EDITOR UI_FORMS STEP name Filter for STEP Package mapping form should be case insensitive 2090604 ALLEGRO_EDITOR UI_FORMS Undo/Redo UI grayed out when invoking Color192 2203278 ALLEGRO_EDITOR UI_FORMS "Width" keyword in Place Rectangle field is shown as Grayed out when Place Rectangle radio button is selected 2209172 ALLEGRO_EDITOR UI_FORMS Manufacture – Drafting – Relative Copy, In options window drop down menu covering text. 2239426 ALLEGRO_EDITOR UI_FORMS Cannot start with decimal (.6) in the setup > design parameters > text form with English(denmark) settings in Region 2245035 ALLEGRO_EDITOR UI_FORMS The right edge of the default Define Grid form looks cut off in 17.4. 2245955 ALLEGRO_EDITOR UI_FORMS Resizing of 'Reject Item Selection' window is not possible in 17.4 S004 2249202 ALLEGRO_EDITOR UI_FORMS Extra click required to activate Pass field in Autorouter form 2259605 ALLEGRO_EDITOR UI_FORMS Ability to resize Reject pop-up 2090517 ALLEGRO_EDITOR UI_GENERAL Shape visibility box is not being enabled with the Enable layer select mode option in the Visibility Pane 2092436 ALLEGRO_EDITOR UI_GENERAL RefDes length of input string for Modify Design Padstack is limited to 20 characters 2134781 ALLEGRO_EDITOR UI_GENERAL The PIN Class is missing in Options tab when creating or opening a Mechanical Symbol 2168026 ALLEGRO_EDITOR UI_GENERAL Edit Properties Drawing slow to launch 2191267 ALLEGRO_EDITOR UI_GENERAL Changing Visibility of any object type disables links in Layer Select Mode 2208018 ALLEGRO_EDITOR UI_GENERAL The text on the BGA pins are not visible in release 17.4 until it is zoomed. 2225753 ALLEGRO_EDITOR UI_GENERAL dark theme does not respect TRBICON size for 4K monitors 2256841 ALLEGRO_EDITOR UI_GENERAL Enlarge the Shape Copy to Layers form as the window is quite small and not resizable 2258019 ALLEGRO_EDITOR UI_GENERAL White canvas after closing STEP Package Mapping window 2258167 ALLEGRO_EDITOR UI_GENERAL Expand or resize the Shape Copy to Layers GUI in release 17.4. 2262305 ALLEGRO_EDITOR UI_GENERAL Assign differential pair form the list boxes size is too congested to add signals. 2086574 APD OTHER Duplicate layer text shown on the vias 1723825 APD SCRIPTS APD 17.2 is not writing out to either jrl files or script files in real time. 2186363 APD UI_GENERAL Text on the Pin is not visible until zoomed in to certain extent 2253484 APD WIREBOND APD hangs when running wirebond soldermask create with Measure from soldermask pad option. 2241725 CAPTURE DRC Waive DRC option not working from batch DRC window 2243645 CAPTURE DRC Online DRC bug in release 17.4-2019 HotFix 004 off-page connector does not have wire 2250867 CAPTURE DRC Hanging wire custom DRC not working when selected standalone 2252912 CAPTURE DRC Unable to create new DRC File from Browse button in DRC window 2047391 CAPTURE PART_EDITOR Pin type cannot be changed in hotfix 051 2183187 CAPTURE SCHEMATIC_EDI Capture Ctrl + N bug 2190602 CAPTURE SCHEMATIC_EDI Cascading Windows not working in 17.4 Capture 2194374 CAPTURE UX Design Sync issues 2183037 CIS LINK_DATABASE CTRL-L shortcut for Link DB-Parts for Query in CIS-Explorer not working 2201323 CIS PLACE_DATABAS Issues with "Cannot place Database part" pop up window 2216963 CIS PLACE_DATABAS LIGHT THEME: Warning text not visible in Capture CIS dialog 2230651 CONCEPT_HDL CHECKPLUS Discrepancy in checkplus marker files 2237145 CONCEPT_HDL CONSTRAINT_MG T-Points matched groups lost if Save Hierarchy on design 2246452 CONCEPT_HDL CORE Page information is getting removed from top level design's master.tag file when sub designs are made read only. 2057490 CONSTRAINT_MGR CONCEPT_HDL CM Worksheet flips after running hier_write with the CM Opened 2236329 CONSTRAINT_MGR CONCEPT_HDL Pin Pairs not added to Match Group 2214367 CONSTRAINT_MGR INTERACTIV CSet assignment matrix sorting in Net Class-class seems random in Capture to Constraint Manager flow 2243574 CONSTRAINT_MGR OTHER CM SKILL cmxlPutAttribute() cannot set constraint value 2259598 CONSTRAINT_MGR OTHER Importing netlist: Error for electrical constraint data (pstcmdb.dat) import 2207862 CONSTRAINT_MGR SYSCAP Save button/ File --> Save in constraint manager is inactive 2200316 CONSTRAINT_MGR UI_FORMS Expanding sections of Constraint Modes will reset the modified column positioning(in "Analyze->Analysis Mode" dlg in CM) 2097479 PCB_LIBRARIAN CORE Symbol import in Part Developer does not show the correct pin shape. 2145385 PCB_LIBRARIAN CORE Error-SPLBPD-972:Missing parentheses in the ALT_SYMBOLS property in the Part. 2202622 PCB_LIBRARIAN CORE Space between pin changes when we add new pin to symbol in symbol editor. 1955570 PCB_LIBRARIAN FLOW Using the PACK_SHORT property with more than 256 characters does not work or report an error on packaging 2072190 PCB_LIBRARIAN FLOW Allow pack_short property value longer that 255 characters 1720395 PCB_LIBRARIAN IMPORT_OTHER Converting OrCAD OLB to HDL adds braces to pin number 2141340 PCB_LIBRARIAN SETUP SPLBPD-216 Error logged in PDV even when MAX_SIZE Sheet is defined 2214973 PCB_LIBRARIAN SETUP PDV lock directives appears to prevent applying symbol property templates 2257527 PCB_LIBRARIAN SETUP The symbol outline is larger than the page size - either reduce the symbol size or increase the page size 2033898 PCB_LIBRARIAN SYMBOL_EDITOR Running symboleditor with no arguments results in a background process, not an error. 2093849 PCB_LIBRARIAN SYMBOL_EDITOR Symbol font text and appearance different when placed in Schematics 2200399 PCB_LIBRARIAN SYMBOL_EDITOR Several issues editing parts in the New Symbol Editor 2218940 PCB_LIBRARIAN SYMBOL_EDITOR Duplicate pins cannot be removed 2230542 PCB_LIBRARIAN SYMBOL_EDITOR bus pin location changed after do expand or collapse in NSE 2239303 PCB_LIBRARIAN SYMBOL_EDITOR When expanding and collapsing a bus in NSE it will always change the pinname to 2243431 PCB_LIBRARIAN SYMBOL_EDITOR Symbol Editor group pin movement issue 2029056 PCB_LIBRARIAN SYMBOL_EDITOR Grid setting to match HDL and symbol 2149948 PCB_LIBRARIAN SYMBOL_EDITOR New Symbol Editor and System Capture moved pins which on 0.01 grid to 0.05 grid. 2206975 PSPICE MODELEDITOR PSpice Model Import Wizard symbol preview readability improvement 2211187 PSPICE MODELEDITOR Model editor color scheme not readable. 2214415 PSPICE MODELEDITOR Symbol view in Model Import Wizard has visibility problem 2199570 PSPICE PROBE Unable to 'select sections' after Monte Carlo runs with Temperature 2244140 PSPICE PROBE Not able to select multiple sections to plot in probe 2249565 PSPICE PROBE Selecting multiple traces for PSpice A/D Monte Carlo run not working 2171626 PULSE CORE Pulse crashed with error Pulse down open JDK binary 2221523 PULSE UNIFIED_SEARC (SID:35305) Another case of SamacSys and Ultralibrarian not working, but working in COS. 2019229 RF_PCB OTHER Layer conversion file data does not update GDSII layer mapping using Package Symbol Wizard 820288 SIP_LAYOUT COLOR Layer Priority command does not seem to be functioning 820305 SIP_LAYOUT COLOR Layer Priority menus do not match the color dialog menu in the SiP tools 2256044 SIP_LAYOUT DATABASE Fix teardrop does not work for some situations: Deleting fixed fillets 2254932 SIP_LAYOUT DEGASSING APD Plus generating assertions failures when running degassing mode with script 2106314 SIP_LAYOUT INTERACTIVE Large design causing severe lag in Windows Server machine 2096239 SIP_LAYOUT STREAM_IF Database fails to create stream out file 2079071 SIP_LAYOUT SYMB_EDIT_APP Response very slow after Show IC Details on a very large co-design die 2251630 SIP_LAYOUT WIREBOND 'Change Profile' does not change the diameter of the wire bond 2253633 SIP_LAYOUT WLP advanced degassing passing illegal arguments to dba routine 2259630 SIP_LAYOUT WLP Advanced WLP - Import PVS DRC's 1968437 SYSTEM_CAPTURE ASSIGN_SIGNAL Net name pasted in lower case though UPPERCASE INPUT is enabled 2131976 SYSTEM_CAPTURE AUTOMATION System Capture exits when run with the '-tclfile' argument and an invalid Tcl file 1983063 SYSTEM_CAPTURE BLKDIAGRAM_AU Auto Shapes are being shown as part of components 2108846 SYSTEM_CAPTURE CAPTURE_IMPOR System Capture stops responding on importing Capture design imported from third-party 1977673 SYSTEM_CAPTURE COMPONENT_BRO adding reference blocks through add component error when cell name matches design name 2247567 SYSTEM_CAPTURE COMPONENT_BRO Symbol property placeholder changes not updated on the canvas 2027100 SYSTEM_CAPTURE COMPOSITE_FIL pstdedb.cdsz and netlist preview in System Capture is not being updated when individual netlist files are written 1863460 SYSTEM_CAPTURE DARK_THEME Thumbnail preview is in light theme but when dragging the page, the preview is in dark theme 2168622 SYSTEM_CAPTURE EDIT_SEARCHRE S1-B-SYSCAP: Reports from Find Results are getting dumped even when the operation is cancelled 2168625 SYSTEM_CAPTURE EDIT_SEARCHRE S1-B-SYSCAP: Sort icon for the columns in the "Find Results" are misrepresented 1895142 SYSTEM_CAPTURE EXPORT_PCB System Capture reports incorrect unsaved changes when closed after running export physical 1931660 SYSTEM_CAPTURE EXPORT_PCB System Capture stops responding when PCB Editor is started for a board listed in the project view 2087387 SYSTEM_CAPTURE EXPORT_PCB System Capture: After Export PCB completes, busy cursor shown for a while 2202179 SYSTEM_CAPTURE FIND_REPLACE Crash when replacing Nets with same name using Find and Replace UI 1843885 SYSTEM_CAPTURE FORMAT_OBJECT Renaming a net causes it to lose custom color assignment 1993208 SYSTEM_CAPTURE FORMAT_OBJECT Setting font prior to placing text does not work, pop-up does not work, and bucket results in scrolling page 2231399 SYSTEM_CAPTURE IMPORT_BLOCK importBlock command not working via command line operations in TCL script 1907729 SYSTEM_CAPTURE IMPORT_DEHDL_ Import DE-HDL sheets - differential pair properties on nets are lost 2025949 SYSTEM_CAPTURE IMPORT_DEHDL_ Title block and thick wires/lines of border in DE-HDL do not translate in System Capture 1942542 SYSTEM_CAPTURE IMPORT_PCB System Capture - TDO backannotation overwrites net names with stale data in lower-level blocks 1982320 SYSTEM_CAPTURE IMPORT_PCB View files are not created in the schematic-to-board flow 2117532 SYSTEM_CAPTURE MENUS_AND_TOO HAbility to customize menus for a site 2213478 SYSTEM_CAPTURE MENUS_AND_TOO Help -> About menu item appears twice 1910941 SYSTEM_CAPTURE MISCELLANEOUS Parts that are not in any schematic page appear in netlist and BOM 1967614 SYSTEM_CAPTURE MISCELLANEOUS Dragging a circuit with net aliases does not move the net aliases with it 2189846 SYSTEM_CAPTURE MISCELLANEOUS Inconsistent display of same font 2178961 SYSTEM_CAPTURE NOTES Cannot add Japanese text in notes in release 17.4-2019 on Windows 10 1973437 SYSTEM_CAPTURE OPEN_CLOSE_PR Opening a design crashes System Capture 2079857 SYSTEM_CAPTURE OPEN_CLOSE_PR System Capture: Unable to select design to open if license selection box is cancelled the first time 2065025 SYSTEM_CAPTURE PACKAGER Export to PCB Layout reports wrong path for packaged 2229611 SYSTEM_CAPTURE PACKAGER Path for the "packaged" folder shown in the "Export Physical" is incorrect 1993146 SYSTEM_CAPTURE PROJECT_EXPLO Cannot move page up by only one position 1892120 SYSTEM_CAPTURE PROPERTY_EDIT Some parts are missing reference designators and some have two properties - RefDes and REFDES 2201060 SYSTEM_CAPTURE PROPERTY_EDIT S2-B-SYSCAP: Some of the icons in the "Properties" tab are missing the tool-tips 2246667 SYSTEM_CAPTURE SCRIPTING Invalid command name returned by the execution of replay.tcl script 2010032 SYSTEM_CAPTURE SHORTCUTS Cannot enter Page-Up/Page-Down as shortcuts - we can in DE-HDL 2017985 SYSTEM_CAPTURE TDO Allegro System Capture Ability for multiple users to open design 2106743 SYSTEM_CAPTURE TDO Ability for multi-user access to the same schematic 2209628 SYSTEM_CAPTURE UI Design Rule Checks data tips pop-up is graphically clipped 1990258 SYSTEM_CAPTURE VARIANT_MANAG Cannot paste copied preferred part to multiple parts with the same part number 2032005 SYSTEM_CAPTURE VARIANT_MANAG Custom variables not saved for variants 2228299 SYSTEM_CAPTURE VARIANT_MANAG The preferred part component browser should not show CAP parts when I'm changing a RES 1627835 SYSTEM_CAPTURE WIRING Inconsistencies in the wire movements 1670888 SYSTEM_CAPTURE WIRING Rotation error when connected to a power symbol 1721863 SYSTEM_CAPTURE WIRING Net Names move to random locations when components are moved around the canvas. 1960130 SYSTEM_CAPTURE WIRING Disconnected nets when using the mirror option 1961274 SYSTEM_CAPTURE WIRING XNet removed during pin swapping 1968463 SYSTEM_CAPTURE WIRING System Capture should not allow illegal characters to be entered for net names 1973426 SYSTEM_CAPTURE WIRING Selecting multiple net names and trying to delete only deletes one net name. 1978381 SYSTEM_CAPTURE WIRING 'oops' does not remove the first vertex placed 1985029 SYSTEM_CAPTURE WIRING Net aliases are not dragged with circuit, they appear to move after the circuit is dropped 2013647 SYSTEM_CAPTURE WIRING Replacing a vertically oriented RES with a horizontal CAP breaks the wire connections 2014188 SYSTEM_CAPTURE WIRING RMB context menu not working in Variant mode 2041879 SYSTEM_CAPTURE WIRING XNets generated for nets with pull-up resistors 2050533 SYSTEM_CAPTURE WIRING Need an option to increase junction dot size 2061877 SYSTEM_CAPTURE WIRING Place Power Symbol from pull down not working 2079409 SYSTEM_CAPTURE WIRING Increase the size of the wire connection dot in System Capture 2081884 SYSTEM_CAPTURE WIRING Symbols take a long time to move, and results in DRCs and broken connections 2085263 SYSTEM_CAPTURE WIRING System Capture: Focus lost from the Format tab if font name starting with typed letter is not present 2089569 SYSTEM_CAPTURE WIRING Ability to specify the solder dot radius size Fixed CCRs: SPB 17.4 HF006 04-30-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2194747 ALLEGRO_EDITOR DFM Minimum gap DFM error within same polygon not caught 2233051 ALLEGRO_EDITOR DFM Copper Spacing: Thru via hole to Non signal shape DRC not working with BB via 2238666 ALLEGRO_EDITOR DFM DFF Silkscreen constraints showing DRC even though there is no violation. 1938592 ALLEGRO_EDITOR EDIT_ETCH Not able to use AiDT option to length match the traces. 1960535 ALLEGRO_EDITOR EDIT_ETCH AiDT does not work for buses with width larger than minimum width 2036229 ALLEGRO_EDITOR EDIT_ETCH AiDT does not work on Non-default min Width 2157973 ALLEGRO_EDITOR EDIT_ETCH AiDT is not working due to line width constraints 2175464 ALLEGRO_EDITOR EDIT_ETCH auto tuning in AiDT fails to tune differential pairs 2223214 ALLEGRO_EDITOR EDIT_SHAPE Menus for Shape Operations are missing from OrCAD menu set 2213659 ALLEGRO_EDITOR INTERACTIV Last placed component is unplaced in Allegro PCB Editor because cross placement is picking that component 2216410 ALLEGRO_EDITOR INTERACTIV Issue with cross place from OrCAD Capture to PCB Editor: placed part selected 2253831 ALLEGRO_EDITOR INTERFACES Release 17.2-2016, HotFix065: Some arc segments not mirrored properly on exporting PDF with Film mirrored checked 2254260 ALLEGRO_EDITOR INTERFACES Arc lines not flipping correctly in PDF in HotFix004 and HotFix005 when the film is mirrored 2226610 ALLEGRO_EDITOR NC Backdrill_pressfit_connector - the bottom side drill passes are not getting excluded 2228366 ALLEGRO_EDITOR NC Setting 'BACKDRILL_OVERRIDE' to 'TOP:TOP:BOTTOM:BOTTOM' does not work 2230619 ALLEGRO_EDITOR NC PCB Editor stops responding when creating Layer Pairs in the Backdrill Layer Pair Initialization window. 2241339 ALLEGRO_EDITOR NC Setting 'Backdrill_Override' to 'top:top:bottom:bottom' leads to incorrect backdrill analysis result 2236280 ALLEGRO_EDITOR PAD_EDITOR Drill tool size reverts to original value 2232567 ALLEGRO_EDITOR PLACEMENT Place manually by library takes long time in HotFix 064 2243727 ALLEGRO_EDITOR PLACEMENT Allegro PCB Editor crashes on Place Manual 2246145 ALLEGRO_EDITOR PLACEMENT Place manually by 'library' as the source takes much longer than it used to in release 16.6. 2215844 ALLEGRO_EDITOR SHAPE Route Keepout prevents correct shape update 2234915 ALLEGRO_EDITOR SHAPE PCB Editor crashes on selecting 'Trim corner' popup option in Shape Edit mode 2078335 ALLEGRO_EDITOR SKILL Discrepancy with axlAddSelectBox() and axlSingleSelectBox() definition 2223446 ALLEGRO_EDITOR SKILL Casing of axlDBTextBlockFindName() 2231369 ALLEGRO_EDITOR SKILL Invalid option type warning when using "axlFilmCreate("test" ?polyCutLayer nil)" 2235666 ALLEGRO_EDITOR UI_FORMS Export parameters window is small and cannot be scaled up in HotFixes 003 and 004 2239984 ALLEGRO_EDITOR UI_FORMS Callback function for form not invoked if multiple fields are selected by dragging mouse 2167454 ALLEGRO_EDITOR UI_GENERAL Custom commands and HTML XProbe: Triggering actions from HTML files 2227489 ALLEGRO_EDITOR UI_GENERAL HTML cross probing in release 17.4 works partially 2222689 ALLEGRO_LIB_CRT CORE Edit External Padstack from LC 2233072 CAPTURE CONNECTIVITY OrCAD Capture stops responding on transferring occurrence property to instance 2237520 CAPTURE GENERAL Issue with CIS toolbar translation in Japanese: Capture crashes 2220792 PSPICE PROBE Release 17.4-2019, PSpice: Unable to read simulation messages in summary window 2239253 PSPICE PROBE Message summary dialog in PSpice in release 17.4-2019 does not show message 2234913 PULSE CORE Data node crash because of going out of memory 2236450 PULSE CORE Database syntax error: server out of memory 2222469 PULSE UNIFIED_SEARC OrCAD Capture Search Providers crash with specific part placement 2233638 PULSE UNIFIED_SEARC Capture crashes when trying to use Place > Search Providers 1913829 SPECCTRA LICENSING Cannot run SPECCTRA with an OrCAD PCB Expert license 2212091 SPECCTRA LICENSING Include OrCAD PCB Router license for autorouting in OrCAD PCB Expert suite (PO9205) Fixed CCRs: SPB 17.4 HF005 04-3-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2193202 ADW DBEDITOR Error when running Create & Verify Schematic. 2201904 ADW DBEDITOR Sizable and HAS_FIXED_SIZE symbols cannot finish step 'Create & Verify Test Schematic' 2203005 ALLEGRO_EDITOR ARTWORK Mechanical Pin buried in Shape, the pad shape is not output. 2228644 ALLEGRO_EDITOR CROSS_SECTION 'Quick Report' - 'Cross-Section Report' causes PCB Editor to crash 2115596 ALLEGRO_EDITOR DATABASE Unused Pad Suppression removes pin connected to shape using Net_short property 2162464 ALLEGRO_EDITOR DATABASE Suppress pads does not work if vias are placed within a pad on outer layers 2210267 ALLEGRO_EDITOR DATABASE Suppress unconnected pads and same net spacing not working correctly when placed within a thru pin pad 2208277 ALLEGRO_EDITOR INTERACTIV Output Symbol pin report cannot be displayed quickly within the embedded HTML viewer 2211906 ALLEGRO_EDITOR INTERACTIV Moving a group to a specific area causes PCB Editor to stop responding 2197277 ALLEGRO_EDITOR IN_DESIGN_ANA Unable to complete crosstalk simulation 2200834 ALLEGRO_EDITOR MANUFACT The Variant command creates an incorrect Assembly Drawing 2213081 ALLEGRO_EDITOR PLACEMENT Function swap performed between different devices 2116353 ALLEGRO_EDITOR SKILL Add more details about the parameters for documentation of axlDBTextBlockCreate() 2222748 ALLEGRO_EDITOR STEP 'STEP Package Mapping' crashes PCB Editor 2214375 ALLEGRO_EDITOR UI_FORMS Importing .dxf will change the location of the board file to the location from where the DXF is imported. 2222610 ALLEGRO_EDITOR UI_FORMS 'new_filedialog_disable' variable is available in release 17.4-2019 HotFix 002 but not in HotFix 003 2225939 ALLEGRO_EDITOR UI_FORMS Form displays garbled text when customized for Chinese. 2227452 ALLEGRO_EDITOR UI_FORMS Tab key behavior in Grid form: Does not skip read-only fields 2227470 ALLEGRO_EDITOR UI_FORMS Drop-down behavior in Grid forms: Needs two clicks to open 2217707 ALLEGRO_EDITOR UI_GENERAL Release 17.4-2019: Unable to save boards in directory containing special characters - accented E 2220484 ALLEGRO_EDITOR UI_GENERAL Net name not displayed in PCB Editor in release 17.4-2019, HotFix 003 2223895 ALLEGRO_EDITOR UI_GENERAL Net names not displayed correctly for pins in release 17.4-2019 2228023 ALLEGRO_EDITOR UI_GENERAL Exporting libraries to an existing folder is not working with PCB Editor in release 17.4-2019 2233006 ALLEGRO_EDITOR UI_GENERAL Export Libraries and Browse Destination Directory do not close dialog box when selecting folder 2229727 ALLEGRO_EDITOR VALOR EXPORT ODB++ fails due to Extracta error 2230312 ALLEGRO_EDITOR VALOR Extracta license error when running ODB++ from OrCAD PCB Designer products 2230579 ALLEGRO_PROD_TOOLB OTHERS Issue with OrCAD Productivity Toolbox not showing LabelTune in the menus 2138418 APD SHAPE Crash when manually voiding shape using Shape > Manual Void > Polygon 2006587 APD SKILL Assigning an RKO group to a shape using SKILL reveals drc update bug 2193918 CAPTURE DRC Run DRC in batch using Tcl command 2204357 CAPTURE GENERAL Update Properties is very slow in release 17.4-2019 2225153 CAPTURE GENERAL Release 17.4-2019: OrCAD Capture stops responding on selecting Update Properties 2225139 CAPTURE ONLINEDRC Creating netgroup crashes OrCAD Capture in release 17.4-2019 2197733 CAPTURE OTHER 'Place part' pop-up option in PSpice component search window is not working 2208656 CAPTURE OTHER Capture CIS is not in the Venture Design Authoring suite 2222491 CAPTURE PCBFLOW Design Sync, board to schematic, is not creating layers in Constraint Manager 2203234 CIS PART_MANAGER Release 17.4-2019: On clicking in 'Update Parts' window, OrCAD Capture CIS covers Part Manager window 2203678 CIS PART_MANAGER Capture crashes when the Part Manager window is moved to a second monitor 2222665 CM HIERARCHY patchData/isr.txt missing from release 17.4-2019, HotFix 003 2046129 CONCEPT_HDL CORE Hard location assigned in Attribute dialog goes back to Soft Location in Change command 2205522 CONCEPT_HDL CORE Orphan NetGroups/PortGroups cannot be removed 2214271 CONCEPT_HDL CORE Missing pin numbers after packager run 2215442 CONCEPT_HDL CORE Signal not showing up in the global navigation window 2218220 CONCEPT_HDL CORE Allegro Design Entry HDL crashes when adding net name 2218931 CONCEPT_HDL CORE Orphan NetGroups cannot be deleted 2224055 CONCEPT_HDL CORE Orphan NetGroups appear in Constraint Manager. 2195946 CONSTRAINT_MGR UI_FORMS Columns do not auto adjust when zooming in the font size within CM 2233974 CONSTRAINT_MGR UI_FORMS Cell selection method for clearing values has changed in Constraint Manager in release 17.4-2019 2217104 F2B BOM BOM Generation fails when Template File “Customize” button is clicked or Output file is changed 2221737 FLOWS PROJMGR Project Manager shows licensing error pop-up when selecting Allegro PCB Designer (Layout) license. 2223898 FLOWS PROJMGR Licensing error in Project Manager when using Allegro PCB Designer license 2235087 MODEL_INTEGRITY GUI Cannot open .ibs model in Model Integrity editor in release 17.4-2019 2223080 PULSE SERVER Release 17.4-2019, HotFix 003: Part Information Manager error (SPDWUB-6) for SSL-enabled server configuration 2206655 SIP_LAYOUT DIE_ABSTRACT_ Die Abstract Library Manager options must be updated to accommodate overrides 1954925 SIP_LAYOUT SHAPE Unexpected auto-voiding of a dynamic shape: deformed arcs 1976970 SIP_LAYOUT SHAPE Irregular notch in shape voiding 2218538 SYSTEM_CAPTURE DOCKED_CM CM, Electrical: Units being used are different from the column defaults when no units are entered manually 2153198 SYSTEM_CAPTURE FORMAT_OBJECT The con:: commands should override any default values set for objects. 2227735 SYSTEM_CAPTURE MISCELLANEOUS Text size is bigger for a few Signal Names even when the Font type and size are same for all Text Fixed CCRs: SPB 17.4 HF004 03-6-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2181458 ADW DBEDITOR dbeditor - old version retained when using Copy-as 1809803 ADW PART_BROWSER Hyperlink support with pipe to shorten the path does not work in new Component Browser 2213946 ALLEGRO_EDITOR DFM DFM Copper Feature reporting Min shape width (positive) as 0 mils 2213976 ALLEGRO_EDITOR DFM DFM Cutout to shape reports a violation at 9.44 mils when rule is set to 8 mils. 2120228 ALLEGRO_EDITOR EDIT_ETCH Sliding vias containing dynamic teardrop jump away in unpredictable directions 2204713 ALLEGRO_EDITOR EDIT_ETCH Lag in commands when working with board in release 17.2-2016 and 16.6 2203244 ALLEGRO_EDITOR MULTI_USER Symphony team design error with intermittent crash on refreshing DB 2199583 ALLEGRO_EDITOR PLACEMENT Place Manual on fixed part causes crash. 2210240 ALLEGRO_EDITOR SCRIPTS View switching on the visibility tab does not work in script. 2209926 ALLEGRO_EDITOR UI_FORMS Issue with working layers form - cannot see all layers in one go. 2136023 APD BGA_GENERATOR 'add connect' does not snap to the BGA pins for padstacks other than SMD 1818908 APD OTHER axlGeoClosestPointOnArc produces incorrect results 2161871 APD REPORTS Net delay report is stuck on one net 2196327 CAPTURE BACKANNOTATE Error message while backannotating after swapping in PCB Editor 2210415 CAPTURE BACKANNOTATE Design Sync gives Error message when PCB Editor has used function swap, however it does swap the functions in schematic. 2186857 CAPTURE DRC DRC window reports each DRC warning twice 2195581 CAPTURE DRC Online DRCs to locate footprints from path relative to active board 2210489 CAPTURE DRC Waiving a DRC error in release 17.4-2019: Not listed in DRC windows 2214742 CAPTURE DRC Missing function for Waive DRCs in Find window in Capture in release 17.4-2019 2204814 CAPTURE LIBRARY CONNECTOR.OLB\CON2 has predefined footprint value in release 17.4-2019 2191753 CAPTURE ONLINEDRC Capture crashes when copying hierarchical block multiple times with Online DRC on 2199818 CAPTURE ONLINEDRC Online DRC reports error of missing pins with H-Part, hence does not perform Design Sync 2207327 CAPTURE ONLINEDRC Footprint are still listed as missing in Online DRC 2216323 CAPTURE ONLINEDRC Online DRC does not support parts with CLASS set to MECHANICAL 2197754 CONCEPT_HDL CORE Note command results in alignment issue due to spaces added to the end of words 2076622 CONCEPT_HDL CREFER DE-HDL crashes on setting 'Generate Cross References for all nets' from 'Cross Referencer Options' to run CRefer 2088599 CONCEPT_HDL CREFER Crefer generating schematic with wrong RefDes without suffix 2208007 CONCEPT_HDL OTHER Pin Names not backannotating to Allegro Design Entry HDL 2213854 CONSTRAINT_MGR ANALYSIS Attempting to add a via to a .dra will crash Allegro with no dump file generated. 2195821 CONSTRAINT_MGR UI_FORMS Length values are light gray in Net > RPD worksheet in CM 2195950 CONSTRAINT_MGR UI_FORMS UI issue: CM auto scrolling to the left when net name is selected 2204781 EAGLE_TRANSLATOR PCB_EDITOR PCB Translator stacks all of the incoming components in the lower left corner of the board. 2208544 PCB_LIBRARIAN SYM_CREATOR_C Value of $PN 2207844 PULSE UNIFIED_SEARC Cannot access third-party components using valid credentials from Capture 2214339 SIG_EXPLORER SIMULATION SigXplorer crashes when using the 'Manage LayerStacks' option. 2186309 SIP_LAYOUT DEGASSING Degassing does not add voids to the entire shape 2215871 SIP_LAYOUT DEGASSING Teardrop prevents the shape degassing command from completing 2213471 SYSTEM_CAPTURE CUSTOM_TEXT Custom variables become read-only after a note is added to the schematic. 2169359 SYSTEM_CAPTURE IMPORT_DEHDL_ Unable to import the project sheets, fails for a page 1899491 SYSTEM_CAPTURE PROPERTY_EDIT Cannot change project variables 2168546 SYSTEM_CAPTURE PROPERTY_EDIT Unable to exit edit mode after editing RefDes value on canvas Fixed CCRs: SPB 17.4 HF003 02-7-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2174984 ADW DBEDITOR Local Flow Verify - Failed to verify the part due to the error null - FAILED 2180529 ADW DBEDITOR Unable to release a part - For logical part, pack type is present in chips.prt but missing in ptf 2193985 ADW PART_BROWSER Part Information Manager not displaying DRA footprints in lower-level folders 2195842 ALLEGRO_EDITOR ARTWORK Drill Symbol Triangle has an offset in Artwork 2191531 ALLEGRO_EDITOR DATABASE Export libraries cannot export package 2167460 ALLEGRO_EDITOR DFM DesignTrue annular ring SMD pin to antipad checks not working in HotFix 058 2186669 ALLEGRO_EDITOR DFM DFF check of 'Copper Spacing: Shape to Shape' should not generate DRC for shapes generated for teardrop 2184335 ALLEGRO_EDITOR EDIT_ETCH PCB Editor stops responding when routing an arc by using the 'Connect' command 2199429 ALLEGRO_EDITOR EDIT_ETCH PCB Editor stops responding when routing a cline 1744042 ALLEGRO_EDITOR GRAPHICS Unused pad suppression is not working on a few nets 2200146 ALLEGRO_EDITOR IN_DESIGN_ANA On creating groups for Return Path Analysis, PCB Editor crashes 2177214 ALLEGRO_EDITOR PAD_EDITOR Import/Export .pxml file issue: thermal data is not imported 2179169 ALLEGRO_EDITOR PLACEMENT Via array staggered not working 2183401 ALLEGRO_EDITOR SCHEM_FTB 17.4 Design sync is not working with spaces in the path 2193390 ALLEGRO_EDITOR SCHEM_FTB Capture crashes when board filename contains a space 2193886 ALLEGRO_EDITOR SCHEM_FTB Capture crashes if new layout name or path has spaces 2193896 ALLEGRO_EDITOR SCHEM_FTB Design Sync fails when there is space character in project directory 2205386 ALLEGRO_EDITOR SCHEM_FTB Capture 17.4 goes into 'not responding' mode when the design sync contains space or different characters 2206402 ALLEGRO_EDITOR SCHEM_FTB Design sync in capture stops responding if there are spaces in directory name 2207279 ALLEGRO_EDITOR SCHEM_FTB Design sync does not work. Gives error about something in session log, that is not there. 2211384 ALLEGRO_EDITOR SCHEM_FTB Design Sync fails when there is space character in project directory 2212155 ALLEGRO_EDITOR SCHEM_FTB Capture crash on creating new layout when design file path has space in it 2214652 ALLEGRO_EDITOR SCHEM_FTB Capture crash on creating new layout because of space in board filename 2199694 ALLEGRO_EDITOR SHAPE Board crashes with Shape update 2190606 ALLEGRO_EDITOR UI_FORMS Custom SKILL form display gets extended in release 17.4-2019 2190607 ALLEGRO_EDITOR UI_FORMS Property edit/assign window does not show Value column 2197816 ALLEGRO_EDITOR UI_FORMS In File > Import Logic/Netlist, TAB key selection is not working properly 2197844 ALLEGRO_EDITOR UI_FORMS Add space after the X and Y labels in the Define Grid window 2207434 ALLEGRO_EDITOR UI_FORMS GUI from SKILL routines are all truncated in release 17.4-2019 but are fine in previous releases 2213968 ALLEGRO_EDITOR UI_FORMS Issue with Property Edit - 'DYN_THERMAL_CON_TYPE ' Assign form: Form can be resized but is not dynamic 2215590 ALLEGRO_EDITOR UI_FORMS Edit property window has column with fixed size 2216405 ALLEGRO_EDITOR UI_FORMS assign window for Property Edit does not show Value column 2191455 ALLEGRO_EDITOR UI_GENERAL Alt key removes heads up display 2195848 ALLEGRO_EDITOR UI_GENERAL Panning does not work in 17.4 when pcb_autoroam environment variable is set 2205534 ALLEGRO_EDITOR UI_GENERAL Allegro editors and viewers crash if allegro_history set to 0. 2168018 ALLEGRO_PROD_TOOLB CORE PCB Design Compare - Limit check to outline extents only functionality 2172272 ALLEGRO_PROD_TOOLB CORE Placing a module in Fab panelization gives error message regarding handling nil 2163792 ALTM_TRANSLATOR PCB_EDITOR Third-party translator translating symbol names incorrectly 2079742 APD DIE_GENERATOR Die symbol property reset does not work 2200707 APD PADSTACK_EDIT Pad Editor cannot save the pad and cannot close it. 2197201 CAPTURE DRC PCB Footprint symbols in a completed 17.2 design are reported as missing in Capture Online DRC 2190454 CAPTURE NETLIST_ALLEG Cross-section layers not creating in Constraint Manager in release 17.4-2019 2191880 CAPTURE NETLIST_ALLEG Design sync is not respecting the character length limit specified in Create Netlist dialog under Setup 2195552 CAPTURE NETLIST_ALLEG Sync between Capture and PCB Editor fails if custom PCB Footprint property is used 2196312 CAPTURE NETLIST_ALLEG Design sync is not respecting the character length limit specified in Create Netlist dialog under Setup 2203680 CAPTURE NETLIST_ALLEG Netlsiting displays errors but the log file is empty 2198474 CAPTURE PCBFLOW Netrev process continuously running in background even when capture is left idle and nothing is happening 2104576 CONCEPT_HDL CORE Validating physical part information for components in design - DE-HDL stops responding for 2 minutes 2184466 CONCEPT_HDL CORE Choosing 'Rename signal' should prompt to save all pages 2186418 CONCEPT_HDL CORE Allegro Design Entry HDL crashes when run from command line 2187234 CONCEPT_HDL CORE Layer specific constraints are displayed incorrectly on the canvas 2187237 CONCEPT_HDL CORE Restrict modifying the text size of attributes on the canvas when a component is locked 2164539 CONCEPT_HDL CREFER Crefer missing when instance and part names are same 2195341 CONCEPT_HDL CREFER crefer treats all notes as left-justified in release 17.2-2016, HotFix 061 2191513 CONCEPT_HDL OTHER net_spacing_type cannot be deleted from nets 2211141 CONSTRAINT_MGR ANALYSIS CM physical - add via to from Library stops responding in release 17.4 HotFix 002 2213280 CONSTRAINT_MGR DATABASE Undesired multiple Targets set for a single Matched Group in CM 2187885 CONSTRAINT_MGR UI_FORMS Switching worksheets from "CSet Assignment Matrix" to other worksheet is slow 2195942 CONSTRAINT_MGR UI_FORMS Directive CM_FILTER_SKILL_DEFINED_PSCSETS is not working in release 17.4, HotFix 001 2175941 INSTALLATION BASE "Anyone who uses this computer (All Users)" is disabled even when the user is with Administrator privileges. 2195765 INSTALLATION BASE 'Install for all users' is grayed out while installing release 17.4-2019 2203319 INSTALLATION BASE "Anyone who uses this computer (All Users)" is disabled even when the user is with Administrator privileges. 2177200 ORBITIO LEFDEFINTERFA OrbitIO stops responding when importing Innovus created def 2180100 PSPICE LIBRARIES Incorrect search result and message for EVALAA 2166988 PULSE R2PLM Invalid credentials during login: require to close and run R2PLM 2195275 PULSE R2PLM Stale BOM is published unless BOM refresh icon is clicked 2189236 PULSE UNIFIED_SEARC "+" in part name causing errors in Search 2206626 PULSE UNIFIED_SEARC Search Providers does not allow to place parts and keeps waiting for result 2195018 SCM SETUP Adding PINUSE column to CCP crashes SCM 2187247 SIG_EXPLORER OTHER SigXPlorer crashes when launching Help > About 2188742 SIG_EXPLORER OTHER SigXPlorer cannot be launched with Aurora in release 17.4-2019 2190608 SYSTEM_CAPTURE ARCHIVER Error regarding missing cell on archiving a design 2173730 SYSTEM_CAPTURE DOCUMENTATION Application notes refer to incorrect location in release 17.4-2019 2185147 SYSTEM_CAPTURE DRC Crash while executing Tcl command 'setDRC' before opening the project 2168976 SYSTEM_CAPTURE PACKAGER RefDes conflict violation does not appear when PACK_IGNORE is removed from a part and a conflict is created 2168980 SYSTEM_CAPTURE PACKAGER RefDes disappears from the part because of PACK_IGNORE when doing a Copy/Paste Fixed CCRs: SPB 17.4 HF002 01-10-2020 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2172317 ADW DBEDITOR Adding a property to EDM root classification does not add to the child classifications 2175654 ADW FLOW_MGR Cannot see any flow files to select in EDM flow manager 2176681 ADW FLOW_MGR Message regarding error detected in the CPM file (FM-107) on opening or creating new project 2177303 ADW FLOW_MGR Error on opening and creating new project (FM-107) 2177411 ADW FLOW_MGR Opening ECAD designs throw bad configuration error after Java upgrade to 1.8.0_231. 2178451 ADW FLOW_MGR ERROR (FM-107) on opening project 1932831 ADW LIBDISTRIBUTI fetch_dump stops responding intermittently when using HTTP over high latency networks 2175810 ADW LIBDISTRIBUTI Incomplete copy of principal.jar during lib_dist_client/fetch_dump. 2182780 ALLEGRO_EDITOR CROSS_SECTION Cross-section chart 'Draw options' - 'Layer Gradient Draw'/'Background Gradient Draw' not working properly 2182820 ALLEGRO_EDITOR CROSS_SECTION Release 17.4-2019: Color Draw - Gradients is not working in via list viewer 2165940 ALLEGRO_EDITOR DFM DesignTrue mask to trace and mask to shape checking not performing correctly 2167385 ALLEGRO_EDITOR DFM DesignTrue DFF annular ring fiducial to antipad checks not working. 2167469 ALLEGRO_EDITOR DFM DesignTrue DFM: plated slot annular ring pad to mask checks inconsistent 2167972 ALLEGRO_EDITOR DFM Thieving vias are treated as antenna vias in DesignTrue DFF copper features antenna via checks 2183231 ALLEGRO_EDITOR DFM Design performance slow when DFF checks are turned on. 2163281 ALLEGRO_EDITOR DRC_CONSTR Pad-Pad Direct Connect waived constraint reappears after DRC update 2168354 ALLEGRO_EDITOR DRC_CONSTR Differential pair static phase is yellow, but nets are routed 2167870 ALLEGRO_EDITOR DXF Compose Shape: Imported DXF shape broken into arcs 2155376 ALLEGRO_EDITOR EDIT_ETCH Unwanted cline segment is added when neighboring cline is slided 2173191 ALLEGRO_EDITOR EDIT_ETCH Cannot create unique via structure 2177943 ALLEGRO_EDITOR INTERFACES PDF Export contains extra page for bond wires 2132476 ALLEGRO_EDITOR MANUFACT Silkscreen is different for rounded rectangle pads and rectangular pads 2136257 ALLEGRO_EDITOR MANUFACT 'Clear soldermask pad' option is not working in 'Auto Silkscreen' 2146676 ALLEGRO_EDITOR MANUFACT Autosilk bug causes WARNING(SPMHA1-36): Illegal LINE identifier -- while running a symbol update 2113054 ALLEGRO_EDITOR MULTI_USER UDbidRange error in Symphony team design 2121348 ALLEGRO_EDITOR MULTI_USER Changes are not updated for some users in a team in Symphony 2161495 ALLEGRO_EDITOR MULTI_USER Symphony: Changes not saved with 'rejected by server' and 'Waiting for a UDbidRange' messages 2177830 ALLEGRO_EDITOR MULTI_USER Symphony not writing back to the master 2176609 ALLEGRO_EDITOR PAD_EDITOR Padstack Editor should be updated for Slot Hole to prevent Secondary Drill tab from being shown. 2184958 ALLEGRO_EDITOR PLACEMENT Quickplace fails to place components with the ALT_SYMBOL property 1940677 ALLEGRO_EDITOR SCRIPTS Commands in two script files executed in the incorrect order 2046472 ALLEGRO_EDITOR SCRIPTS Replay of script to set paper size in PDF OUT shows "Value for field is not legal" 2185517 ALLEGRO_EDITOR UI_FORMS Route Automatic form flicker when adding a new pass to Routing Passes tab 2188939 ALLEGRO_EDITOR UI_FORMS Visibility filters for pin numbers of chip-on-board wire bond die bump 2088685 ALLEGRO_EDITOR UI_GENERAL Memory leak and performance degradation opening 1000 .dra databases 2092690 ALLEGRO_EDITOR UI_GENERAL PCB Editor slows down during opening of 1000 databases 2160120 ALLEGRO_EDITOR UI_GENERAL When using Pop Mirror funckey, component jumps to origin in OrCAD PCB Designer 2184444 ALLEGRO_EDITOR UI_GENERAL Highlight command replaces assigned color output and Dehighlight does not get it back 2204326 ALLEGRO_EDITOR UI_GENERAL Allegro_html environment variable cross-probing behavior different in release 17.4-2019 than 17.2-2016 2194007 ALLEGRO_EDITOR VALOR Release 17.4-2019: Cannot generate ODB++ output with the Expert Suite bundle licenses 2176543 ALLEGRO_LIB_CRT CORE Variable DFA_DEV_CLASS is not being exported into the Allegro footprint 1500285 APD EDIT_ETCH 'Route' - 'Slide' performs erratically when fillets are present where the cline sizes transition 2185101 CAPTURE BACKANNOTATE Release 17.4-2019: Design Sync does not work on design with occurrence properties 2188890 CAPTURE BACKANNOTATE Design Sync not working on hierarchical designs. 2196225 CAPTURE BACKANNOTATE Unable to Design Sync Board to Schematic 2181901 CAPTURE DRC Unable to delete DRC Markers in release 17.4-2019 2186321 CAPTURE DRC 'Show DRC output' in DRC window does not remember NONE option 2190356 CAPTURE DRC Cannot delete DRC-markers in schematic 2191194 CAPTURE DRC Cannot remove DRC markers in the Design rule check GUI 2202656 CAPTURE DRC Capture release 17.4-2019: Delete existing DRCs does not work 2176603 CAPTURE NETLIST_ALLEG Differences shown in design sync dialog for a CM-enabled project even if schematic and board are in sync 2195754 CAPTURE NETLIST_ALLEG Design Sync giving the same report even if the connection exist 2172767 CONCEPT_HDL CORE DE-HDL crashes on renaming signal on an interface with a second tab with the symbol open 2174515 CONCEPT_HDL CORE No architecture declaration in the source file message while doing Generate View for Hierarchical split symbol . 2177255 CONCEPT_HDL CORE DE-HDL stops responding on Copy-Paste of properties from one instance to another 2179334 CONCEPT_HDL CORE The database version tag '' is not updated for release 17.4-2019 2173568 CONCEPT_HDL INTERFACE_DES DE-HDL crashes when drawing a wire to a netgroup 2170851 CONCEPT_HDL OTHER DE-HDL menu related message not clear 2173009 CONCEPT_HDL OTHER Launching Project Manager (projmgr.exe) takes time to get license from license server 2053288 CONSTRAINT_MGR INTERACTIV Constraint Manager: region deleted even on clicking 'NO' 1988160 CONSTRAINT_MGR OTHER Clicking on CSet link in Show Constraints form does not go to CSet in CM 2185694 CONSTRAINT_MGR OTHER Relative prop delay values in 17.4-2019 do not show pin pairs on choosing Analyze from popup on the Match Group 2187251 CONSTRAINT_MGR OTHER Constraint Manager crashes when clicking on the cell for the MAX_PARALLEL rule 2174345 CONSTRAINT_MGR SCHEM_FTB Running Import Logic on an out-of-sync board does not bring in the constraints and connectivity 2187242 CONSTRAINT_MGR UI_FORMS CSet names from the 'Value Filter' not sorted alphabetically 2195944 CONSTRAINT_MGR UI_FORMS Re-launching CM does not retain the last state 2195948 CONSTRAINT_MGR UI_FORMS UI issues with CM in release 17.4 - Expanded state of WS is not getting preserved on applying object filters. 2175399 PSPICE ENVIRONMENT PSpice AA Topics are missing from Learning Resources for release 17.4-2019 2174141 PSPICE NETLISTER Netlister not able to pass local parameter in specific case for complex hierarchical designs 2176668 PULSE UNIFIED_SEARC 3D STEP models are not downloaded for some providers 2107770 SCM NETLISTER Error (SPCOHD-198) regarding incorrect signal syntax on netlisting 2172198 SIP_LAYOUT DIE_ABSTRACT_ SiP Layout uses 25GB memory for showing IC details and does not finish command for showing details 2090037 SIP_LAYOUT INTERACTIVE Batch Layer Compare: cannot check quadrant against another symmetrical quadrant in same design using Mirror/Rotate 2175747 SIP_LAYOUT ORBITIO_IF Support component height translation between OrbitIO and Allegro layout editor 2057538 SIP_LAYOUT STREAM_IF Streaming out a design with embedded dual-sided symbol (eBar) causes inadvertent mirrored symbol in .sf file 2187945 SIP_LAYOUT STREAM_IF Stream out causes crash 2165064 SIP_LAYOUT WIREBOND Wire Bond push and shove tools not working in a constraint area. 2182331 SYSTEM_CAPTURE CROSSPROBE Cross-probe from System Capture to Allegro PCB Editor loop back issues 2167994 SYSTEM_CAPTURE EDIT_SEARCHRE Unable to edit a net name on canvas after modifying it using an external editor 2168628 SYSTEM_CAPTURE EDIT_SEARCHRE Find Results: pop-up Edit menu does not appear for user property with NULL value 2166980 SYSTEM_CAPTURE PROJECT_EXPLO Navigating signals from the Navigation viewer jumps to the project viewer 1996873 SYSTEM_CAPTURE UI Incorrect message to resolve conflict during part packaging 2168585 SYSTEM_CAPTURE UI Error message from the "Violation Window" does not resolve '%S' 2166933 SYSTEM_CAPTURE WIRING Visible net properties are not getting moved with the circuit move Fixed CCRs: SPB 17.4 HF001 11-23-2019 ======================================================================================================================================================== CCRID Product ProductLevel2 Title ======================================================================================================================================================== 2115805 ADW DBEDITOR 'BOTH' in ALT_SYMBOLS prevents correct generation of part_table.ptf 2141840 ADW FLOW_MGR EDM Flow Manager crashes on opening TDO-enabled projects on some versions of Linux 567342 ALLEGRO_EDITOR COLOR Add option under View menu for 'load color view' 720274 ALLEGRO_EDITOR COLOR Add menu option for the 'colorview load' command 2077601 ALLEGRO_EDITOR DATABASE For multi-zone flex board with one and two layers, drill legend for mechanical hole not created in one-layer zone 2151260 ALLEGRO_EDITOR DFM DFF Copper Spacing - Trace to Thru via hole false error, typically on arc segments 2157524 ALLEGRO_EDITOR DFM DFF CF sliver violation not detected when shape formed is too narrow 2163835 ALLEGRO_EDITOR DFM PCB Editor crashes on moving line in board file 2167426 ALLEGRO_EDITOR DRAFTING The diameter symbol is in front of the measurements instead of being behind 2118231 ALLEGRO_EDITOR DRC_CONSTR Crash during DRC: DBDoctor exits with error 'Illegal database pointer encountered' 2150923 ALLEGRO_EDITOR DRC_CONSTR Via at SMD fit DRC not detected with rounded rectangle pads 2119099 ALLEGRO_EDITOR EDIT_ETCH When routing to an unused suppressed via padstack, PCB Editor is not following the cline to drill constraint value 2140643 ALLEGRO_EDITOR EDIT_ETCH Crash on editing board file 2155363 ALLEGRO_EDITOR EDIT_ETCH Unable to route with Hug or Shove selected as Bubble type and unused pad suppression enabled 2157174 ALLEGRO_EDITOR EDIT_ETCH Incremental move using ix for sliding via slides via in y direction as well for Pre-select operation 2140162 ALLEGRO_EDITOR INTERACTIV Using axlAirGap(),testing with a NPTH padstack which has no pad, the coordinates are swapped in return value. 2155499 ALLEGRO_EDITOR INTERACTIV Inconsistencies while defining and adding properties to text objects 2162490 ALLEGRO_EDITOR INTERACTIV OrCAD PCB Design crashes when modifying Outline Vertex 2161517 ALLEGRO_EDITOR MULTI_USER Allegro Symphony is slow 1934516 ALLEGRO_EDITOR OTHER Show measure returns a large value for Airgap when measuring gap between a pin with null pad and another pin 2160610 ALLEGRO_EDITOR SCHEM_FTB Import netlist directory path is not saved 2162492 ALLEGRO_EDITOR SCHEM_FTB Import netlist does not remember the last/latest import directory path 2164135 ALLEGRO_EDITOR SCHEM_FTB The Import Logic form is not able to remember the Import Directory path in release 17.2-2016, HotFix 059 2166451 ALLEGRO_EDITOR SCHEM_FTB Import Logic/ Netlist does not remember import directory path in release 17.2-2016, HotFix 059 2168387 ALLEGRO_EDITOR SCHEM_FTB Import Netlist directory is not saving in design. 2168915 ALLEGRO_EDITOR SCHEM_FTB Import Logic does not remember import directory 2172195 ALLEGRO_EDITOR SCHEM_FTB Path set in 'Import directory' while performing 'File' - 'Import' -'Logic/Netlist' is not remembered 2182677 ALLEGRO_EDITOR SCHEM_FTB Import Netlist does not remember the last 'Import directory' path 2182777 ALLEGRO_EDITOR SCHEM_FTB 'File' - Import Logic/Netlist' does not remember the last 'Import directory' value 2139039 ALLEGRO_EDITOR SHAPE Same net shape to hole spacing is only detecting DRC and not voiding shape 2144493 ALLEGRO_EDITOR SHAPE Tapered Trace - 'Desired Angle' reset to default value (60) 2144663 ALLEGRO_EDITOR SHAPE Tapered shape - 'Desired Angle' reset to 60 2152607 ALLEGRO_EDITOR SHAPE Edit Shape Vertex slow to respond when degas holes are present 2166870 ALLEGRO_EDITOR SHAPE Tapered trace angle does not work 2173679 ALLEGRO_EDITOR SHAPE Taper trace does not keep the desired angle when form is closed 2136158 ALLEGRO_EDITOR STEP Update STEP Mapping Data Only should be a separate menu/command 1990594 ALLEGRO_EDITOR UI_FORMS The new browse window from Netlist Import fills in a name in the directory field 1621188 ALLEGRO_EDITOR UI_GENERAL Setup > Outlines>Design Outline should have Apply disabled in Edit mode 1699230 ALLEGRO_EDITOR UI_GENERAL Changes made in Visibility tab are lost 1833733 ALLEGRO_EDITOR UI_GENERAL Menu displays garbled text when customized for Chinese in release 17.2-2016 2156748 ALLEGRO_EDITOR UI_GENERAL Incorrect datatip display for pin without pin number 2051884 ALLEGRO_PROD_TOOLB CORE Panelization with the Productivity Toolbox is deleting design outline 2136311 APD EDIT_ETCH Hug broken in slide command 2134146 APD SHAPE Dynamic shape not voiding consistently 1711460 APD UI_GENERAL 'Help' - 'About' shows wrong design application name 2009024 ASI_SI GUI PCBSI Report file export fails on Linux 2154651 CONCEPT_HDL CORE Wire > NetGroup > Edit... crashes DE-HDL 2169550 CONCEPT_HDL CORE DE-HDL crashes on saving hierarchy for large designs 2106767 CONSTRAINT_MGR SCM Clicking Resolve in the 'Alias Property Conflict Report' does not perform any action 2162536 CONSTRAINT_MGR UI_FORMS Enabling Directly-Set filter in Physical or Spacing CSet worksheet crashes PCB Editor 2123632 F2B BOM BOM-HDL .rpt file does not adhere to settings defined 2142211 F2B BOM Unable to create comma separated BOM Report 1979056 PCB_LIBRARIAN SYMBOL_EDITOR System Capture: Filled dots are shown as circles 2104538 PSPICE AA_FLOW Distribution defined in DIST property on part is not honored 2088188 PSPICE AA_MC PSpice AA MC log file is not showing error if distribution is not defined 2104482 PSPICE AA_MC Distribution cannot be defined at the global level in assign tolerance GUI 2111593 PSPICE AA_MC PSpice Advanced Analysis MC - distribution in global tolerance window does not work 2161864 PULSE R2PLM Second publish with CPM-derived item number and cadName set to $NUMBER causes 'an item is not unique' error 1784979 SIP_LAYOUT DATABASE Results are not consistent on turning on/off the pins/vias in the Color Dialog box using the Visibility tab 2020912 SIP_LAYOUT UI_GENERAL Capture Canvas Image will not save in .jpg format, only saves in .BMP format. 2092069 SIP_LAYOUT UI_GENERAL Generic: File browser does not append selected file extension if none provided, always uses original 2144754 SYSTEM_CAPTURE DARK_THEME Create variant form has dark blue on dark black background making it difficult to read 2170317 SYSTEM_CAPTURE MISCELLANEOUS Custom forms do not appear in the proper size within the tool 2163119 SYSTEM_CAPTURE NEW_PROJECT Unable to place special symbols. 2166932 SYSTEM_CAPTURE SELECTION_FIL Discrepancy in the total number of objects reported in the Selection Filter 2175529 TOPXP GUI TOpology Explorer does not give warning/error when ngnd is not connected 2176710 TOPXP GUI Lost s-param checking functions for wrapped s-param model in SPICE block 2179306 TOPXP GUI Need to have the option for DC-level shift as default 2170140 TOPXP PARALLELBUS_A Circuit/channel sim correlation does not produce output 2171205 TOPXP PARALLELBUS_A SystemSI does not allow simulations beyond 1000 bits when Spectre is used